Home|News|Literature|Journal|Instruction|Forum|Member|Introduction

Chinese  Old version

By    In    Search 

  HomeContents of Chinese Journal of Mechanical Engineering 2006 No.5SIMULATION AND MICRO-PIV RESEARCH ON CLASSICAL MICROCHANNEL FLOW

SIMULATION AND MICRO-PIV RESEARCH ON

CLASSICAL MICROCHANNEL FLOW

 

xIE Haibo  FU Xin  YANG Huayong  CHEN Hong

(State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027)

 

Abstract: Both the theoretical and experimental analyses on several typical micro channels of the micro fluidic systems are presented. The flow patterns of the rigging angle bend channel, the sudden expansive channel and the elbow channel on the pressure driven mode are numerically analyzed by using CFD simulation technology. The simulation method for the electroosmosis is described and the electroosmosis flow inside the cross channel is simulated. Four kinds of micro channel models are micromachined with glass material and experimentally detected by using Micro-PIV technology. A good agreement is obtained by comparing the simulation results with the experimental results. From the results, The Micro-PIV technology is indicated to be the most efficient experimental method for micro flow detection. Furthermore, N-S equation is experimentally proved to be correct in the micron flow numerical simulation.

Key words: Micro fluidic system  Micro-PIV  CFD  Electroosmosis

CLC No: TH137  TH-39

国家自然科学基金(50335010)和高等学校博士学科点专项科研基金(20030335026)资助项目. Received 20050610, received in revised form 20051115

 

Open or Download Full Text of this Paper (PDF File)
 
  About us-Contact us-Site map-Advertisement service-Cooperation-Legal statement  

Address: 22 Baiwanzhuang Dajie, Beijing 100037 China    Tel: 8610-88379907    Fax: 8610-68994557

E-mail: cjme@mail.machineinfo.gov.cn  http: //www.cjmenet.com
©2006 Editorial Office of CJME. All Right Reserved