INDOOR ANALOG EXPERIMENT AND ENGINEERING APPLICATION ON  HIGH TEMPERATURE HEAT PUMP

WANG Zhiguo^{1, 2}  SONG Yongchen¹  LIU Yu1  XIANG Xinyao²  MA Yitai³

(1. School of Energy and Power Engineering,Dalian University of Technology, Dalian 116024;
2. Qinhuangdao Branch, Daqing Petroleum Institute, Qinhuangdao 066004;

3. Thermal Energy Research Institute,Tianjin University, Tianjin 300072)

Abstract: Aiming at the facts that lots of low temperature waste heat from some industries(such as oil, chemical, power and steeel works) is abundant but rarely used, a waste heat recovery analog experiment on a home-made high temperature heat pump set-up is conducted. According to the test data and results, the empirical expressions of all performance indexes are regressed under the condition of using R142b as refrigerant, heat source temperature at 35～45 °C, heating temperature at 60～85 °C, and compressor output at 2.3～3.7 kW. Also the impacts of parametric variations on performance indexes is analyzed. Furthermore, an engineering trial is performed by an industrial heat pump made overseas operating in oil field. The investigations indicate massive energy can be saved if heat pump is applied to recover the low temperature waste heat from oil production process. The operating cost of heat pump system is nearly the same as that of heater system, which restricts the popularization of heat pump.

Key words:High temperature heat pump  Waste heat recovery  Analog experiment  Engineering application  Performance analysis

CLC No: TB615

国家重点基础研究发展计划(2000026307)和中国博士后科学基金(2005038256)资助项目. Received 20051012, received in revised form 20060204