Home|News|Literature|Journal|Instruction|Forum|Member|Introduction

Chinese  Old version

By    In    Search 

  HomeContents of Chinese Journal of Mechanical Engineering 2007 No.10SYNTHESIS OF FOUR-BAR APPROXIMATE STRAIGHT-LINE LINKAGE WITH INFINITELY FAR INSTANT CENTER

SYNTHESIS OF FOUR-BAR APPROXIMATE STRAIGHT-LINE LINKAGE WITH INFINITELY FAR INSTANT CENTER

 

WANG Zhong  ZHU Hongjun  LIAO Lei  YANG Yumin

(School of Manufacturing Science and Engineering, Southwest University of Science and Technology, Mianyang 621010 )

 

Abstract: The coupler curve which is near the zero-curvature point on the inflection circle is close to the straight line, the mechanism is often as the approximate straight-line guidance mechanism. When the instant center of linkage is infinitely far, there is no inflection circle in the linkage of four-bar linkage mechanism. It is difficult to synthesize approximate straight-line mechanism by the old methods. According to the intuitionistic analysis, a logical superposed formula for curvature of every spot locus on the linkage of four-bar linkages is presented, when the instant center of linkage is infinitely far. Afterward the formula is deduced by relativistic kinematics. The superposed formula is correct, and a diagrammatizing method getting zero-curvature spot on the linkage is gained by this formula, then the formula is successfully applied to synthesize the four-bar approximate straight-line linkages with infinitely far instant center. The method has such advantages: simplicity, visualization and practicality, which strongly supplements the theory of the inflexion circle.

Key words: Approximate straight-line  Four-bar linkage mechanism  Synthesis

CLC No: TH13

国家高技术研究发展计划(863计划, received in revised form 20072AA421220)和四川省教育厅计划(2004C016)资助项目. Received 20061227, received in revised form 20070806

 
Open or Download Full Text of this Paper (PDF File)
 
  About us-Contact us-Site map-Advertisement service-Cooperation-Legal statement  

Address: 22 Baiwanzhuang Dajie, Beijing 100037 China    Tel: 8610-88379907    Fax: 8610-68994557

E-mail: cjme@mail.machineinfo.gov.cn  http: //www.cjmenet.com
©2006 Editorial Office of CJME. All Right Reserved