Home|News|Literature|Journal|Instruction|Forum|Member|Introduction

Chinese  Old version

By    In    Search 

  HomeContents of Chinese Journal of Mechanical Engineering 2008 No.2Robust 2 Degree-of-freedom H Control for NC Rotary
Table Direct Drive Rotary Feeding System

Robust 2 Degree-of-freedom H Control for NC Rotary
Table Direct Drive Rotary Feeding System

 

SUN Yibiao  JIN Shi  WANG Chengyuan

(Electric Engineering Institute, Shenyang University of Technology, Shenyang 110023)

 

Abstract: To make the direct drive rotary feeding system with good interference rejection and tracking performance to speed command, an H speed controller based on model matching robust two-degree-of-freedom (2DOF) control is designed. The H controller is better in robustness against load disturbances and parameters variations. Simultaneity, the robust 2DOF structure is adopted and the model matching problem is considered to enhance asymptotical tracking performance of the servo system to speed signal and respond speed and to solve the conflict between interference rejection and fast tracking performance. Simulation results show that the proposed robust 2DOF H speed controller guarantees the robustness and exact speed tracking for high-precision direct drive round table servo system.

Key words: NC rotary table  Direct drive  Ring permanent magnet torque motor  Robust two-degree-of- freedom(2DOF)  H speed control

CLC No: TP273 TM359.

国家自然科学基金资助项目(50375102). Received 20070323,  received in revised form 20070924

 
Open or Download Full Text of this Paper (PDF File)
 
  About us-Contact us-Site map-Advertisement service-Cooperation-Legal statement  

Address: 22 Baiwanzhuang Dajie, Beijing 100037 China    Tel: 8610-88379907    Fax: 8610-68994557

E-mail: cjme@mail.machineinfo.gov.cn  http: //www.cjmenet.com
©2006 Editorial Office of CJME. All Right Reserved