|
Abstract: A transducer driver signal acquisition system is developed. The voltage and current signal of the transducer are acquired during the ultrasonic heavy aluminum wedge bonding. The input power and output impedance signal are calculated. Under different conditions, 1 000 times bonding tests are carried through, and driver signals are recorded. According to the test results, the time-domain characters of the input power and output signals are proposed, the relationship between bonding strength and the average value of input power or output impedance are obtained. The results show that the bonding strength and input power of transducer system has an obvious relationship like a parabola with downward open side. Phase P1 and P2 are the main phases effecting the bonding strength, and have the same important functions. Although phase P3 has no effect on the bonding strength, its average power indicated the bonding strength in a certain extent. But the relationship between output impedance and bonding strength is not clear, and not fit to indicate bonding strength.
Key words: Wire bonding Transducer system Input power Output impedance
CLC No:
TN911.6 TG453+.9
国家重点基础研究发展计划(973计划, 2003CB716202)、国家自然科学基金(50705098)、长江学者和创新团队发展计划(IRT0549)资助项目.
Received
20070425,
received
in
revised
form
20071117
|
| References
[1] CHIU S S, CHAN H
L W, OR S W, et al. Effect of electrode pattern on the outputs of
piezosensors for wire bonding process control[J]. Materials Science and
Engineering, 2003, 99(12): 121-126.
[2] LOPEZ C, CHAI L, SHAIKH A, et al. Wire bonding characteristics of
gold conductors for low temperature co-fired ceramic applications[J].
Microelectronics Reliability, 2004, 44(3): 287-294.
[3] MAYER M. Microelectronic bonding process monitoring by integrated
sensors[M]. Konstanz: Hartung-Gorre Verlag, 2000.
[4] WANG Fuliang, HAN Lei, ZHONG Jue. Effect of ultrasonic power on the
heavy aluminum wedge bonding strength [J]. Chinese Journal of Mechanical
Engineering. 2005, 18(4): 515-518.
[5] RAMMINGER S, SELIGER N, WACHUTKA G. Relia- bility model for Al wire
bonds subjected to heel crack failures[J]. Microelectronics Reliability,
2000, 40(10): 1 521-1 525.
[6] CHU P W, LI H L, CHAN H L W, et al. Smart ultrasonic transducer for
wire-bonding applications[J]. Materials Chemistry and Physics, 2002,
75(2): 95-100.
[7] LANDES, JAMES L. Ultrasonic bond energy monitor: United States
Patent, 4341574[P]. 1982-07-27.
[8] OR S W, CHAN H L W, LO V C, et al. Ultrasonic wire-bond quality
monitoring using piezoelectric sensor[J]. Sensors and Actuators, 1998,
65(8): 69-75.
[9] WANG Fuliang, HAN Lei, ZHONG Jue. A PZT driver signal acquisition
and analysis system for ultrasonic wire bonding[J]. Transactions of the
China Welding Institution, 2006, 27(1): 1-5.
[10] WANG Fuliang, HAN Lei, ZHONG Jue. Effect of bonding time on thick
aluminum wire wedge bonding strength[J]. Transactions of the China
Welding Institution, 2006, 27(5): 47-51.
[11] WANG Fuliang, HAN Lei, ZHONG Jue. Effects of ultrasonic power on
heavy aluminum wire wedge bonding strength[J]. China Mechanical
Engineering, 2005, 16(10): 919-923.
|