|
Abstract: Integrated multi-objective
decision-making model is the important basis for the operation of
production process for green manufacturing. According to the existing
machining process and equipment, the objective system is established,
including three economic efficiency goals (productivity, quality, and
cost) , two social benefit goals (environmental effect, professional
health and safety) and a socioeconomic goal of the resources
consumption, A frame model and the mathematic model of integrated
multi-objective decision-making model for production process are presented, which describes the whole production process and the relations of the elements of the multi-objective decision-making model. Finally, a case study is analyzed to show the application of the model.
Key words: Production process Green manufacturing Decision-making model Resource consumption
Environmental impact
CLC No:
TH1866
国家自然科学基金(70571060)、国家科技支撑计划(2006BAF02A03)和高等学校博士点科研基金(20060488001)资助项目.
Received
20070519,
received
in
revised
form
20071108
|
| References
[1]
LIU Fei, CAO Huajun, ZHANG Hua. Theory and
technology of green manufacturing[M]. Beijing: Science Press, 2005.
[2] MUNOZ A A, SHENG P. An analytical approach for de-termining the
environmental impact of machining processes [J]. Journal of Materials
Processing Technology, 1995, 53(3-4): 736-758.
[3] GUTOWSKI T, DAHMUS J, THIRIEZ A. Electrical energy requirements for
manufacturing processes [C]//Proceedings of 13th CIRP International
Conference on Life Cycle Engineering, Leuven, Belgium, 2006: 623-628.
[4] ZHANG Hua, LIU Fei, LI Youru.
Decision-making model of green manufacturing process planning and the
case study[J]. China Mechanical Engineering, 2000, 11(9): 979-982.
[5] CAO Jie, YI Hong. Studying
scheme of green proudcts manufacturing process[J]. Chinese Journal of
Mechanical Engineering, 2002, 38(7): 126-130.
[6] CAO Huajun, LIU Fei, HE Yan, et al. Maching tool selection model
and its application for green manufacturing[J]. Chinese Journal of
Mechanical Engineering, 2004, 40(3): 6-10.
[7] TAN Xianchun, LIU Fei, CAO Huajun, et al. A decision making
framework model of tool selection for green manufacturing and its
applications[J]. Journal of Chongqing University, 2003, 26(3): 117-121.
[8] TAN Xianchun, LIU Fei, CAO Huajun, et al. Green-
manufacturing-oriented synthetic selection model for cut-ting fluid and
its applying case[J]. Tool Engineering, 2002, 36(9): 10-14.
[9] LIU Fei, CAO Huajun, ZHANG Hua, et al. Noise reduction scheduling
method in a shop floor and its case study[J]. Chinese Journal of
Mechanical Engineering, 2003, 16(4): 337-339.
|