Overview
Current development and trends of the tailored blank application in auto-body stamping
……………………………………………………………………………Li Shuhui Lin Zhongqin Ni Jun, et al (1)
Basic Theory
Study of erosion-wear resistance on steel stainless used in turbine
………………………………………………………………Bao Chonggao Gao Yimin Xing Jiandong, et al (8)
Time domain drive model of longitudinal and torsional hybrid type ultrasonic motor
………………………………………………………………… Qu Jianjun Jiang Kaili Yuan Shiming, et al (11)
Study on solution space, working space and cable tension’s optimized analysis for
huge flexible stewart platform ………………………………………………………… Sun Xin Duan Baoyan (16)
Research on laminated removal micro-EDM
………………………………………………………Wang Zhenlong Zhao Wansheng Liu Guangzhuang (22)
Morphologicaly analysising method for the characterisitic of coupler curves of linkage mechanism
…………………………………………………………………………………………… Li Zhen Gui Changlin (27)
Interface reaction of joint Al2O3/(Ag72Cu28)97Ti3/Ti-6Al-4V
………………………………………………………………………… Yu Zhishui Wu Mingfang Qi Kai, et al (31)
Research and implement of a new kind of scanning mode for selective laser sintering
……………………………………………………………… Shi Yusheng Zhong Qing Chen Xuebin, et al (35)
Optimal gate placement for injection molding process
………………………………………………………………………Zhai Ming Gu Yuanxian Shen Changyu (40)
Study on dynamic behavior of encased differential gear train
………………………………………………………………………… Sun Zhimin Shen Yunwen Li Suyou (44)
Based on fratcal theory for STEYR diesel engines diagnose
……………………………………………………………Yang Wenpin Chen Guoding Shi Boqiang, et al (49)
Numerical simulation of non-stable temperature field for liquid extrusion by using FEM
………………………………………………………………………Qi Lehua Shi Zhongke Cui Peiling, et al (53)
Application of Engineering Technology
Measurement and analyses of high velocity arc spraying technique characteristics
………………………………………………………………………… Liang Xiubing Xu Binshi Ma Shining (57)
Volume change in simulation of metal-forming processes
…………………………………………………………………… Zhou Zhe Li Mingrui Huang Wenbin, et al (61)
Study on dynamic characteristics of hydrodynamic torque converter and its control system
…………………………………………………………………… Yan Guojun Dong Yong Zhang Hui, et al (65)
Study on dynamic action of integrated drill string-bit system
……………………………………………………………… Zhu Caichao Xie Yongchun Qin Datong, et al (69)
Kinematics analysis of fully compliant mechanisms using the pseudo-rigid-body model
…………………………………………………………… Yu Jingjun Bi Shusheng Zong Guanghua, et al (75)
Research on synchrodrive control technology for dual motors based on adaptive control
……………………………………………………… Guo Qingding Tang Guangpu Tang Yuangang, et al (79)
Study on the precision prediction for virtual NC turning
…………………………………………………………………………Lu Bihong Ge Yanjun Wang Qiyi, et al (82)
Power density optimization of a real Brayton cycle with constant-temperature heat reservoirs
………………………………………………………………………Chen Lingen Zheng Junlin Sun Fengrui (86)
Error motion diagnosis of NC machine tools, comment and countermeasure
……………………………………………………………………… Hong Maisheng Su Heng Li Zijun, et al (90)
Numerical study of two-phase fluid flow and heat transfer in a power plant condenser
………………………………………………………………………… Huang Xinghua Lu Zhen Wang Qijie (95)
Identification for acoustical paths of the active noise control system in ducts using motional feedback
loudspeaker based on neural networks…………………………… Wu Bin Fei Renyuan Zhou Dasen, et al (100)
3-D body-fitted grid generation of non-clogging pump impeller
…………………………………………………………………………… Li Yi Yuan Shouqi He Zhaohu (104)
Fault detection on cutting tools based wavelet neural network
………………………………………………………………………………………………… Xie Ping Liu Bin (108)
Curvity modification of toroidal worm
………………………………………………………………………………………………… Zhou Liangyong (112)
Study on extrusion step analysis expert system by hybrid inference method
……………………………………………………………………Wang Kaikun Kang Yonglin Liu Quankun (116)
New dynamic method to quantitatively measure wheel flats of trains
…………………………………………………………………………… Feng Qibo Zhao Yan Cui Jianying (120)
Investigation on the thermal stability of a new type hot work die steel CH95
………………………………………………………………………………… Cheng Xianhua Xie Chaoying (123)
Aluminium alloys friction stir welding technology
………………………………………………………… Zhang Tiancang Guo Delun Chen qingang, et al (127)
Upper-bound chamber pressure in hydraulic counter-pressure deep drawing of conical part
……………………………………………………………………………………………………… Tang Jinglin (131)
Nonlinear synthesis control of inverter power supply
………………………………………………………… Huang Pengfei Chen Shujun Lu Zhenyang, et al (134)
Characteristics and quantitative evaluation on CO2 arc welding droplet transfer process
………………………………………………………………………… Yu Jianrong Jiang Lipei Shi Yaowu (137)
Numerical simulation and experimental research on the flowpattern in swirling tube separations
…………………………………………………………………… Peng Weiming Ying Chuntong Zeng Shi (141)
Digital system with waveform control for CO2 welding inverter based on intel 80C196KC
………………………………………………………………………………Ding Jingzhu Yin Shuyan Liu Jia (145)
Simulation study of generalized predictive control of vibration for the sub-micro
ultra-precision turning machine………………………………………………… Shi Xiaoping Zhang Weiping (148)
Applications of new ceramic cutting tools in mechanical engineering
……………………………………………………………Miao Hezhuo Qi Longhao Zeng Zhaoqiang, et al (152)
Minimum regional ring method for calculating radial rotation error of the spindle
…………………………………………………………………………………Yan Shutian Hu Lizhi He Haoli (156)
|