Basic Theory
Study on performances of micro-friction and its control in MEMS
………………………………………………………………………………………………………Liu Ying Wen Shizhu (1)
Study on nonlinear dynamic behavior of planetary gear train dynamic model and governing equations
…………………………………………………………………………… Sun Tao Shen Yunwen Sun Zhimin, et al (6)
Study on nonlinear dynamic behavior of planetary gear train solution and dynamic behavior analysis
……………………………………………………………………………Sun Tao Shen Yunwen Sun Zhimin, et al (11)
Study on mechanism of arc re-ignition in square-wave alternating-current GTAW
…………………………………………………………………… Yin Shuyan Huang Jiqiang Chen Shujun, et al (16)
Novel approach to identify interference between links of stewart platform mechanism
………………………………………………………………………………………………Wang Yuxin Wang Yiming (19)
Method for manipulator to trace a mobile target based on sensitive servo
……………………………………………………………………………Luo Xiang Xi Wenming Mao Yuliang, et al (24)
Optimization for vibration–noise damping reductive structures with tubular symmetrical shapes
………………………………………………………………………………Dong Feng Sun Dagang Lin Muyi, et al (29)
Implementing a web-based synchronously collaborative product design
……………………………………………………………………………………………Jiang Pingyu Chen Xianguo (34)
Switch variable structure control of a flexible manipulator with acceleration feedback
………………………………………………………………………………………Zhang Tiemin Li Guitao Liang Li (39)
Equivalent method for parallel capillary tubes
………………………………………………………………………………………… Zhang Chunlu Ding Guoliang (43)
Fault detection of hydraulic servo-system based on dynamic neural network
………………………………………………………………………………………………Zhang Ruoqing Qiu Lihua (46)
Research and implementation of concept design product
…………………………………………………………………………………………………… Wu bin Shen Jinghu (50)
Four-wheel-steering system based on the variable structure model following control
…………………………………………………………………… Guan Xiqiang Qu Qiuzhen Zhang Jianwu, et al (54)
Application of Engineering Technology
Analytic method to calculate force in the two-tooth-difference cycloid gearing
……………………………………………………………………………………Guan Tianmin Sun Yingshi Lei Lei (59)
Experimental research on mirror-edm using powder-mixed dielectric
……………………………………………………………………………………… Meng Qingguo Zhao Wansheng (64)
Fault diagnosis for gearboxgear based on continuous wavelet transform
………………………………………………………………………………Zheng Haibo Li Zhiyuan Chen Xinzhao (69)
Numerical simulation of contact state of stator and rotor in ultrasonic motor
…………………………………………………………………………… Qu Jianjun Zhou Tieying Zhang Zhiqian (74)
Dynamic characteristics analysis and resonances research on mold oscillator mechanism for continuous casting
………………………………………………………………… Liu Hongzhao Wang Jianping Yuan Daning, et al (79)
Application orthogonal experiment design in increasing dimensional accuracy of U-shaped parts
……………………………………………………………………………… Lin Zhongqin Liu Gang Li Shuhui, et al (83)
Numerical simulation on electro-thermal stress around crack tip in metal thin plate with crack
…………………………………………………………………… Zheng Lijuan Fu Yuming Bai Xiangzhong, et al (90)
Investigation on preheating of powder in SLS machine
……………………………………………………………………… Li Xiangsheng Shi Yusheng Huang Shuhuai (94)
Optimizing design of damping changeable shock absorber Depending on the vehicle model
……………………………………………………………………………Yang Likang Pan Shuangxia Feng Peien (99)
Study on recognition technique of time series analysis in fault diagnosis expert system
…………………………………………………………………………Han Qiushi Xu Baojie Wang Hongjun, et al (104)
Modeling and simulation of milling forces for flexible ball-end milling cutters
…………………………………………………………………………… Ni Qimin Li Congxin Wu Guanglin, et al (108)
Research on semi-active suspension control and performance compromise
…………………………………………………………………………… Chen Long Zhou Kongkang Li Dechao (113)
Study on air phase & solid particles’ moving character in centrifugal pump impeller
……………………………………………………………………………………………Wei Zhangbing Ou Zeshen (117)
Using wavelet scalogram for vibration signals anaylsis
…………………………………………………………………………………Peng Zhike He Yongyong Chu Fulei (122)
Numeric zero-pole placement self-tuning adjuster dispersed with d -transposition
and its apllication in hydraulic system……………………………………… Wu Zhenshun Ji Yongtao Xu Wenbo (127)
Determination of the meshing track of the piral bevel gears forded under the changing meshing forces
……………………………………………………………………… Liu Guanglei Shen Yunwen Wang Sanming (131)
Crashworthiness improvement of passenger cars with computer simulation techniques
…………………………………………………………… Zhang Weigang Zhong Zhihua Zhao Youping, et al (135)
Detection of the rub location in a rotor system with AE sensors and wavelet analysis
………………………………………………………………………………… Chu Fulei Wang Qingyu Lu Wenxiu (139)
Research on the static performance of electro-hydraulic servo system with speed variable pumps
……………………………………………………………………………………Quan Long Neubert T Helduser S (144)
Study on camera calibration technology
…………………………………………………………Zhao Xiaosong Zhang Hongwei Zhang Guoxiong, et al (149)
Research on the mechanism and the avoidance method of cutting interference in
non-circular gear shaping……………………………………………Xiong Zhenqin Wu Xutang Mao Shimin, et al (152)
The content prediction of Chinese Journal of Mechanical Engineering (English Edition),
Vol.15, No.1, 2002………………………………………………………………………………………………………… (156)
国家自然科学基金资助项目进展简介………………………………………………(10, 18, 28, 42, 53, 63, 78, 89, 134, 143)
|