Basic Theory
Study on nano mixed lubrication
………………………………………………………………… Luo Jianbin Liu Shan Pan Guoshun, et al (1)
Direct kinematics analysis of crawl gait for a quadruped robot
……………………………………………………………Chen Xuedong Guo Hongxun Keigo Watanabe (8)
Dynamic performance of electro-hydraulic servo system with speed variable pumps
………………………………………………………………………… Quan Long Neubert T Helduser S (13)
Static property analysis of electrohydraulic single rod cylinder servo systems
……………………………………………………………… Li Hongren Wang Dongliang Li Chunping (18)
Study on the cause to excite squeal based on wavelet transform
……………………………………………………………………… Chen Guangxiong Zhou Zhongrong (23)
Nonlinear dynamical characteristics of a spiral bevel gear system with backlash and time-varying stiffness
……………………………………………………………… Wang Sanmin Shen Yunwen Dong Haijun (28)
Fault diagnosis of cracked rotor based on amplitude and phase wavelet map
…………………………………………………………………… Zou Jian Chen Jin Niu Junchuan, et al (33)
Microstructure and properties of laser clad TiCp/Ni-based alloys composite coating
…………………………………………………………… Wang Xinhong Zhang Min Zou Zengda, et al (37)
Integrated technology of RE system based-on triangular Bézier surface modeling and RP system
………………………………………………………………………………………Xiao Yaoxian Ke Yinglin (42)
Research on comprehensive evaluation method of FMS planning
……………………………………………………………… Sun Liansheng Ning Ruxin Zhang Zhiying (47)
Application of Engineering Technology
Effects of initial imperfection and proportional load path on elastoplastic stability of cylindrical shell
……………………………………………………………… Wu Hongfei Yuan Shijian Wang Zhongren (53)
Mechanical properties and interfacical failure of dissimilar welded joint betweenmartensite and bainite
heat-resistant steel………………………………………… Zhang Jianqiang Wu Su Zhao Haiyan, et al (58)
Analysis on squeeze-mode MR vibration isolator damper force
………………………………………………………………… Fu Hua Fu Zhoudong Wu Genmao, et al (62)
Research on ANN-based prediction model used to double glow plasma surface alloying processing
………………………………………………………………………………Xu Jiang Xie Xishan Xu Zhong (66)
Parameter matching of parallel hybrid electric vehicle powertrain
…………………………………………………………… Peng Tao Chen Quanshi Tian Guangyu, et al (69)
Local coincided design based on trimmed B-spline surfaces
……………………………………………………………………… Jia Ming Lu Zhen Li Yongqing, et al (74)
Thermal expansion type microactuator actuated by induction heating
……………………………………………………………… Wang Guangzhen Ji Linhong Wen Shizhu (79)
Research on modeling and algorithm for material flow network design problem
………………………………………………………………… Li Zhihua Wang Qifu Zhong Yifang, et al (84)
Effects of lubricants on the voltage-controlled friction of silicon oxide/brass rubbing couple
…………………………………………………………… Chang Qiuying Meng Yonggang Wen Shizhu (90)
Development of the master control system of a hardware independent architecture
for CNC machine tools……………………………………… Zhang Zheng Wu Xutang Ma Shugen,et al (93)
Research of roll profile measurement system based on sonic circulation and multi-pulse echo technique
…………………………………………………………………Lu Huibin Wang Wensheng Qi Guangxue (98)
Study on integrated control strategy for a car with a hydro-mechanical continuously
variable transmission system………………………………………………………Sun Dongye Qin Datong (102)
Study on the optimization for electrical discharge machining micro and small hole
……………………………………………………………Jia Zhenyuan Zhou Ming Yang Lianwen, et al (106)
Study on task plan algorithm for injection product and mold collaborative design
………………………………………………………………………Zhou Xionghui Li Xiang Ruan Xueyu (113)
Microstructure and properties of high velocity arc spraying coatings
………………………………………………………………………Liang Xiubing Xu Binshi Ma Shining (119)
Gaming study on the cooperation between supply chain enterprises
………………………………………………………………………………Li Shixin Liu Fei Liu Jun, et al (123)
Synthesized process for zero-failure data of the products
……………………………………………………………………………………………………… Han Ming (129)
HCI-SA/GA based evolutionary design method and application to layout design
……………………………………………………………………Miao Yubin Teng Hongfei Liu Zhanwei (133)
Predicting model of the neural network with adaptation based on GA optimization to rotary machinery
……………………………………………………………………Xu Xiaoli Xu Hongan Wang Shaohong (140)
Research on trapping property of no clearance helical gear pump
……………………………………………………………………Gan Xuehui Hou Donghai Wu Xiaoling (145)
Study on temperature rise of friction surface in disc-braking
……………………………………………Zhuang Guangshan Wang Chengguo Wang Haiqing, et al (150)
The content prediction of Chinese Journal of Mechanical Engineering (English Edition),
Vol.16, No.1, 2003…………………………………………………………………………………………………(155)
Content of Chinese Journal of Mechanical Engineering indexed by Engineering Index (EI)
(Vol.38, No.1, 8, 2002)…………………………………………………………………………………………(57, 118)
“机械工程技术的历史, 进展与展望”主题征文……………………………………………………………… (12)
|