Basic Theory
Mathematical model of rapid prototyping process based on wavelet analysis
………………………………………………………………………Wu Rendong Yan Yongnian Lu Wei, et al (1)
Analysis oscillations in indirect field oriented control of induction motorvia power spectra
………………………………………………………………………………Lu Yimin Mao Zongyuan Zhang Bo (5)
Chaotic characteristics of tribological systems…………………………………………… Zhu Hua Ge Shirong (10)
Iterative near-field acoustic holography with K-space filter
…………………………………………………………………… Li Weibing Chen Jian Bi Chuanxing, et al (14)
Research on the dynamics of a strong nonlinear gear system with A-operator method
……………………………………………………………Zhang Suohuai Shen Yunwen Dong Haijun, et al (20)
New approach for spatial mechanism synthesis with the C-C binary crank by adaptive saddle-fitting
………………………………………………………………………………………Wang Delun Wang Shufen (25)
New theory and algorithm research about topology optimization based on artificial material density
………………………………………………………………Zuo Kongtian Chen Liping Zhong Yifang, et al (31)
Analysis of traveling wave locomotion of snake robot
……………………………………………………………………Chen Li Wang Yuechao Ma Shugen, et al (38)
Study on dynamical performance of wheeled soccer robot
……………………………………………………………………… Zhao Chen Chen Fu Han Xiaojun, et al (44)
Cocktail method for Stewart platform calibration
……………………………………………………………………… Liu Wentao Tang Dewei Wang Zhixing (48)
Study on limiting load for cup-drawing…………………………………………………………… Xiong Zhiqing (53)
Coherent growth and superhardness effect of AlN/VN nanomultilayers
…………………………………………………………………………Li Geyang Lao Jijun Tian Jiawan, et al (56)
Study on thin wall tapered shell drawing forming condition
…………………………………………………………………………Ren Yunlai Nie Shaomin Li Shuoben (60)
Modified biological growth method and its application to the shape optimization of centrifugal impellers
………………………………………………………………… Zhang Minghui Huang Tian Wang Shangjin (65)
General method for arbitrary beam analysis…………………………………………………………… Chen Lian (71)
Application of Engineering Technology
Design of a new type dataarm oriented to virtual assembly and teleoperation
………………………………………………………………………Meng Cai Lin Hua Wang Tianmiao, et al (75)
Research on open-loop precision positioning control of a microdisplacement platform based
on piezoelectric actuators……………………………………………Wei Yanding Lü Yonggui Chen Zichen (81)
Applied limitation of carbon steel and austenitic stainless steel materials in hydroelectric engineering
………………………………………………………………Bao Chonggao Xing Jiandong Gao Yimin, et al (86)
Buckling study on a thin-walled cellular shell of honeycomb sandwich structure
…………………………………………………………………………Liang Sen Chen Hualing Liang Tianxi (90)
Sub-pixel feature extraction and edge detection in 3-D measuring using structured lights
…………………………………………………………………………… Liang Zhiguo Xu Ke Xu Jinwu, et al (96)
Method for finding solution boundary of a nonlinear equation system and its
application in parallel mechanisms…………………………………… Ye Peiqing Li Tiemin Zheng Haojun (100)
Study on differential grating displacement sensor with high resolution
………………………………………………………………Peng Donglin Tan Weimin Liu Xiaokang, et al (105)
Study and development on the rolling-slipping compound passive joint
……………………………………………………………… Huang Yumei Cheng Xiang Gao Feng, et al (110)
Analysis on aerostatic porous spherical bearingsstatic performance
…………………………………………………………………………Lu Zesheng Du Jinming Sun Yazhou (115)
Experiment research about several effective factors of micro thermophotovoltaic system combustion
……………………………………………………………………… Pan Jianfeng Li Detao Deng Jun, et al (120)
Research on mechanical properties of nanocrystalline electroforming layer
…………………………………………………………………………… Lei Weining Zhu Di Qu Ningsong (124)
Kinematic optimization of redundant robot based on self-motion control
………………………………………………………………………… Ye Ping Sun Hanxu Zhang Qiuhao (128)
New generation ISO standard system of GPS……………………………………………………Jiang Xiangqian (133)
Infrared image on-line inspection and remaining life prediction for atmospheric heater tubes
…………………………………………………………………………… Li Ming Lin Cui Li Xiaogang, et al (139)
Study on defect of elliptic delamination of hole exit zone in drilling carbon fibre-reinforced plastics
………………………………………………………………Zhang Houjiang Chen Wuyi Chen Dingchang (145)
Methodology for tool combination optimization of die/ mold cavity rough machining with
sculptured surfaces and islands………………………………… Wang Yu Xu Heguo Gao Chonghui, et al (150)
3D adaptive measuring and 6D manufacture trace genetating for the complex border of car dies
……………………………………………………………………………………………… Liu Hehui Yu Gang (155)
Solution to nonlinearity of CNC based on self-tuning fuzzy slide-mode controller
……………………………………………………………………………Lin Hu Cai Guangqi Yu Dong, et al (160)
Research of discrete-time disturbance observer for linear motor
……………………………………………………………………Sun Lining Cui Jing Qu Dongsheng, et al (164)
Chebyshev approximating four pieces of circular arc to ellipse in machining and operating
……………………………………………………………………………………………………… Peng Yunke (168)
Fault tolerant motion planning for two coordinating manipulators
………………………………………………………………………… Zhao Jing Jing Hongmei Zhang Lei (172)
Fuzzy grey prediction force control scheme based on outer force control loop
…………………………………………………………………………Zhang Guangli Fu Ying Yang Ruqing (177)
Dynamical stress analysis for loose lashing wire grouped blades
………………………………………………………………………Chai Shan Yu Ensun Sun Yigang, et al (182)
Study on the bifurcation character of steering wheel self-excited shimmy of
motor vehicle with dependent suspension……………………………………………………… Lin Yi Li Sheng (187)
Two-dimensional PIV experimental investigation of mean flow field in stirred tank with rushton turbine
……………………………………………………………… Gao Dianrong Wang Yiqun Acharya Sumanta (192)
Content of Chinese Journal of Mechanical Engineering indexed by Engineering Index (EI)
(Vol.39, No.12, 2003)………………………………………………………………………………………………… (70)
国家自然科学基金重点资助项目成果简介…………………………………………………… (37, 64, 114, 149, 198)
《机械工程学报》2004年度1～12期总目次………………………………………………………………… (III～X)
|