Overview
Research on advanced engineering environments
…………………………………………………………………………………… Zhu Aibin Mao Junhong Xie Youbai (1)
Basic Theory
Guided circumferential waves in hollow cylinders
……………………………………………………………………………………………He Cunfu Li Longtao Wu Bin (7)
Classified and grouped Job-Shop scheduling algorithm based on key equipments’ compact procedures
………………………………………………………………………………………………… Qiao Peili Xie Zhiqiang (13)
Influence of liquid and micro-roughness between wheel and rail on the fatigue damage of contact surface
………………………………………………………………………………………………Jiang Xiaoyu Jin Xuesong (18)
Modelling and analysis of transient contact stress and temperature of involute gears
…………………………………………………………………………… Long Hui Zhang Guanghui LuoWenjun (24)
Experimental research on the flow characteristics of ball valve orifice
………………………………………………………………… He Xiaofeng Huang Guoqin Yang Yousheng, et al (30)
Research on applying wavelet analysis to path synthesis for coupler curves of planar four-bar linkages
…………………………………………………………………………… Wang Chengzhi Ji Yuebo Sun Daoheng (34)
Study on whole machine balancing method for coaxial dual-rotor system with little rotating speed difference
………………………………………………………………………………Zhang Zhixin Jin Zhijiang He Shizheng (40)
Research on nonlinear dynamic characteristic for end-milling process
…………………………………………………………………………… Zhang Zhihai Zheng Li Li Zhizhong, et al (45)
Theoretic calculation of arc plasma refractive index
………………………………………………………………………………… Xue Haitao Li Huan Li Junyue, et al (49)
Research on structural dynamics of a general fully compliant robotic mechanism
…………………………………………………………………… Yu Jingjun Bi Shusheng Zong Guanghua, et al (54)
Two-fluid model for flow characteristics of refrigerant through short tube
…………………………………………………………………………………………… Yang Liang Zhang Chunlu (59)
Research on the rolling force model in strip leveling
……………………………………………………………………………………………………………… Bai Zhenhua (63)
Influence of vane curve of solid liquid two-phase flow centrifugal pump of liquidsolid two-phase fluid on
dynamic properties of fluid…………………………………………………… Zhu Yucai Wu Yulin Pan Aixian, et al (67)
Analysis of deflection and pull-in voltage of a multi-layer cantilever under an electrostatic load
…………………………………………………………………… Nie Meng Huang Qing’an Wang Jianhua, et al (72)
Application of Engineering Technology
Adjustable suspending fine blanking die sets
………………………………………………………………………………… Song Yuquan Li Da Yu Wenhui, et al (76)
Nonlinear modeling of hydraulic engine mounts of a car powertrain with computational fluidstructure interaction
finite element analysis models…………………………………………………… Shang guan Wenbin Lu Zhenhua (80)
New technology to control welding stress and distortion with trailing impactive rolling
…………………………………………………………………Fan Chenglei Fang Hongyuan Yang Jianguo, et al (87)
Development and experiment research of hybrid electric vehicle’s powertrain control system
……………………………………………………………………… Gan Haiyun Zhang Junzhi Lu Qingchun, et al (91)
Diagnostic method of blade-to-blade dynamic space for turbo machinery’s blade faults
………………………………………………………………………………… Xie Zhijiang Liu Jun Tang Yike, et al (96)
Reliability sensitivity design for mechanical elements with arbitrary distribution parameters
………………………………………………………………………………………………………………Zhang Yimin (100)
Hydroforming of sheet metal with a movable die component
……………………………………………………………………………… Xu Yi Zhou Lixin Zhang Shihong, et al (106)
Study and measurement on the high-efficiency atomization characteristics of nozzle with an in-line distributor
…………………………………………………………………………… Zhou Hua Fan Minghao Yang Huayong (110)
Energy operator demodulating approach based on EMD and its application in mechanical fault diagnosis
…………………………………………………………………………………Cheng Junsheng Yu Dejie Yang Yu (115)
Piezoelectric motor with long-range and nano-step
……………………………………………………………………………Zhao Meirong Wen Limei Lin Yuchi, et al (119)
Friction stir welding of AZ31 magnesium alloy
……………………………………………………………………………… Zhang Hua Wu Lin Lin Sanbao, et al (123)
Four-step method to design the energy management strategy for hybrid vehicles
………………………………………………………………………Zhu Yuan Tian Guangyu Chen Quanshi, et al (127)
Modeling of product conceptual design processes based on set theory
…………………………………………………………………… Cao Dongxing Tan Runhua Yuan Caiyun, et al (134)
Realization of constraint condition in application of wavele to curve-surface modeling
…………………………………………………………………………………………Yin Jinxiang Cheng Guanlong (140)
Dynamic motion planning and control of under-actuated manipulators based on dynamic sub-space method
………………………………………………………………………… He Guangping Lu Zhen Wang Fengxiang (145)
Theoretical research on the torsional effect of piezoelectric quart wafer and experimental validation
………………………………………………………………………………………… Gao Changyin Sun Baoyuan (150)
Support design rules for part’s non-horizontal undersurface in stereolithography
………………………………………………………………………… Hong Jun Tang Yiping Lu Bingheng, et al (155)
Theoretic model and experiment research of optoelectronic granular solid flowmeter
…………………………………………………………………………… Li Yang Zheng Yingna Wang Renhuang (160)
Fast offset algorithm of auto-panel forming surface
………………………………………………………………………………………Bao Yidong Na Jingxin Hu Ping (166)
Study on the characteristics of the reverse cleaning system of diesel emission particulate metal mesh filter
…………………………………………………………………………… Ning Zhi Zi Xinyun Zhang Chunrun, et al (170)
Life prediction of large lifting equipment under considering the influence of local dynamic effect
…………………………………………………………………… Qu Shuying Wang Xinjian Sun Xianshan, et al (174)
1580 large sizing press kinematics emulation and optimization analysis
………………………………………………………………… Feng Xianzhang Liu Cai Jiang Guangbiao, et al (178)
Simulation on welding process of francis turbine runner’s simplified model
………………………………………………………………………Ji Shude Fang Hongyuan Yang Jianguo, et al (183)
Simulation of railway bogie dynamic stress and elastic vibration
………………………………………………………………………Ren Zunsong Sun Shouguang Li Qiang, et al (187)
The content prediction of Chinese Journal of Mechanical Engineering (English Edition),
Vol.17, No.3, 2004………………………………………………………………………………………………………… (193)
Content of Chinese Journal of Mechanical Engineering indexed by Engineering Index (EI) (Vol.39, No.8, 2003)…………(109)
|