| Basic Theory Application of immune PID controller in hydraulic servo control system
……………………………………………………………………………Zou Jun Fu Xin Yang Huayong, et al (1)
Tactics for improving the real time capability of mechanical product synchronous cooperative design
……………………………………………………………………………………… Luo Yabo Xiao Tianyuan (6)
Sliding model control based on Ackermann’s formula for systems with backlash-like hysteresis
…………………………………………………………………… Zhang Dake Hu Yueming Guo Huafang (11)
Lie groups and lie algebras on dynamic analysis of beam with spatial compliance
………………………………………………………………………………… Ding Xilun Selig John Mark (16)
System reliability model considering common cause failures
…………………………………………………………………………Wang Xuemin Xie Liyang Zhou Jinyu (24)
Experimental investigation on boiling heat transfer of mixture in microchannel tube
……………………………………………………………………… Ma Hugen Hu Zicheng Luo Xing, et al (29)
Relationship between order degree intercepted and mechanical properties of Fe3AL
…………………………………………………………… Pang Laixue Sun Kangning Fan Runhua, et al (33)
Closed picture of point-line gear parameter selection
……………………………………………………………… Luo Qihan Li Haixiang Zhang Yuchuan, et al (37)
New technique for determining the order of ARMA model based on genetic algorithm
…………………………………………………………………………………………………………Chen Guo (41)
Analysis of the CAT data process error for electro-hydraulic servo valve dynamic
phase frequency characteristics…………………………………………………………………………Xu Yimin (46)
Application of Engineering Technology
Judging assembly contact states based on boundary components of convex polyhedron
………………………………………………………………………………………Fei Yanqiong Zhao Xifang (50)
Vibration analysis of a double-layer piezoelectric actuatoer for micropump
……………………………………………………………………… Kan Junwu Wu Yihui Xuan Ming, et al (54)
Research and construction of flexible real time simulation platform for electric
vehicle based on PC cluster…………………………… Qi Zhanning Chen Quanshi Liang Weiming, et al (61)
Research on input shaping for the joint actuated by pneumatic muscles
………………………………………………………………………… Wang Zuwen Sui Liming Bao Gang (66)
Sub-pixel edge detection method for SLM color microscopic images
…………………………………………………………………………… Liu Chong Xia Zeyi Pei Wei, et al (71)
Numerical simulation on microstructure of DC flash butt welding for an 400 MPa
ultra-fine grain steel………………………………………… Wang Weibin Shi Yaowu Lei Yongping, et al (77)
Heat mass transfer model of a honeycombed rotary desiccant wheel and experiment
…………………………………………………………………… Zhang Xuejun Dai Yanjun Wang Ruzhu (82)
Calibration method for a parallel kinematic machine based on relativity analysis
……………………………………………………………………Gao Meng Li Tiemin Yin Wensheng, et al (88)
Algorithmic research on tool-path generation from scattered measure points based on CQEM
……………………………………………………… Huang Yunbao Wang Qifu Huang Zhengdong, et al (93)
Design and location of viscous target in free-form digitisation
………………………………………………………………………………Xue Ting Zhu Jigui Wu Bin, et al (98)
Gene expression-based multi-objective optimization conceptual design of product structure
……………………………………………………………………………… Zhao Tingting Wei Xiaopeng (102)
Water management mode for polymer-exchange membrane fuel cells
……………………………………………………………… Bao Cheng Wu Sai Ouyang Minggao, et al (108)
Elaborate implementation of an equivalent drawbead model in the numerical
simulation of sheet metal forming………………………………… Liu Yanfang Shi Fazhong Feng Tianfei (114)
Design and numerical analysis on an axial-flow model pump with high specific speed
………………………………………………………… Tang Fangping Wang Guoqiang Liu Chao, et al (119)
Numerical simulation of multipass welding’s temperature field and study of temperature distribution rules
…………………………………………………… Meng Qingguo Fang Hongyuan Yang Jianguo, et al (124)
Design reuse method for complicated structure parts in concept design
…………………………………………………………………………… Dong Yan Tan Jianrong Xu Jing (129)
Regulation and error forecast of manufacture system using non-statistical theory
…………………………………………………………… Xia Xintao Wang Zhongyu Zhu Jianmin, et al (135)
Fault diagnosis approach for gears based on EMD and SVM
…………………………………………………………………………Yu Dejie Yang Yu Cheng Junsheng (140)
Study on clustering discretization scheme to faults data table in knowledge acquisition based
on Rough set theory…………………………………………………………Zhao Rongzhen Zhang Youyun (145)
Inverse arch-shaped teeth profile and its optimization in a cycloid drive
………………………………………………………………………… Guan Tianmin zhang Dongsheng (151)
Study of orbit analysis based on complex process high order cumulant spectrum
……………………………………………………………………… Li Yungong Liu Jie Zhu Qibing, et al (157)
Form grinding technology for the mold of powder metallurgy gears
……………………………………………………………………………………… Zhou Yushan Shao Ming (162)
Experiment study on the elocity field near the tongue of a forward curved
multi-blades centrifugal fan…………………………………………Gong Wuqi Lü Weiling Xi Guang, et al (166)
Profile optimization of scrolls based on multiobjective genetic algorithms
…………………………………………………………… Chen Jin Zhang Yongdong Song Liquan, et al (172)
Research on measurement of high-precision aspheric surface
…………………………………………………………………………………… Zhong Jinan Guo Yinbiao (176)
Position detection of permanent maglev impeller in centrifugal heart pump
………………………………………………………………… Qian Kunxi Wan Fukai Ru Weimin, et al (181)
Early fault forecasting based on almost periodic time-varying autoregressive model
……………………………………………………… Chen Zhongsheng Yang Yongmin Hu Zheng, et al (184)
Study on design criteria of strength and vibration as well as life for subcritical
and supercritical steam turbines………………………………………Shi Jinyuan Yang Yu Sun Qing, et al (189)
Study on the arc dynamic adjusting characteristic of pulsed MIG welding
…………………………………………………………… Huang Pengfei Lu Zhenyang Lü Yaohui, et al (193)
Experimental research on flow division control for multi-actuators of construction machine
…………………………………………………… Zhao Weiliang Wang Qingfeng Zhang Yanting, et al (198)
Study on composite fretting wear behaviors of 60Si2Mn steel
…………………………………………………………………… Li Zheng Zhu Minhao Zhou Zhongrong (203)
Grinding performances of the machining fluids of oils on water
…………………………………………………………………Wang Ailing Wei Yuanqian Zhu Xijing, et al (208)
Application of uniform design to improve shallow W-type combustion
system on D.I. diesel engine……………………………………… Yan Wei Zhang Hao Lu Jiangfeng, et al (212)
Study on creep-fatigue interaction behavior of 30Cr1Mo1V under strain-controlled state]
……………………………………………………………………Mao Xueping Liu Zongde Yang Kun, et al (216)
Effect of CeF3 on non-metallic inclusions and impact toughness of self-shieldedlux cored weld
………………………………………………………………………………… Yu Ping Xue Jin Pan Chuan (221)
Approach to solve torsional vibration dynamic characteristics of complicated shaft
………………………………………………………………………Lou Menglin Yan Guoxiang Li Jianyua (226)
Research on vortex motion of BTA drilling shaft caused by hydro-force
…………………………………………………………………………………Hu Zhanqi Zhao Wu Miao Lei (230)
Thrust decoupling control of linear motor driver 3-DOF planar magnetic suspension stage
…………………………………………………………………… Liu Dejun Guo Qingding Weng Xiuhua (234)
书讯………………………………………………………………………………………………………………… (5)
Content of Chinese Journal of Mechanical Engineering indexed by Engineering Index (EI)
(Vol.40, No.1, 2004)…………………………………………………………………………………………………(10) |