Overview
Overview of direct metal rapid prototyping and manufacturing technologies
………………………………………………………………………Yan Zhangong Lin Feng Qi Haibo, et al (1)
Intelligentization of materials processing technology
……………………………………………………………………Xie Jianxin Liu Xuefeng Zhou Cheng, et al (8)
Basic Theory
Design of high performance robust controller of pneumatic servo system
…………………………………………………………Wang Zuwen Zhan Changshu Yang Qingjun, et al (15)
Modeling method of product quality control based on data mining
…………………………………………………………………… Fang Xifeng Zhao Liangcai Wu Hongtao (20)
Chaos control for a gear system with clearance nonlinearity based on
the Ott-Grebogi-Yorke method………………………… Liu Xiaoning Shen Yunwen Wang Sanmin, et al (26)
Theory and application on thickness effect on cracked plate fracture toughness
……………………………………………………………………………Yang Jiyun Zhang Xing Zhang Min (32)
Inner defects ICT diagnosis of homogeneous material based on
maximum image-entropy……………………………………………………………… Li Yang Zheng Yingna (43)
Elastic-plasticity analyse of bending deflection on section
roller straightening………………………………………………… Zang Yong Wang Huigang Cui Fulong (47)
Pressure and vacuum servo control system based on vacuum pump
………………………………………………………………………Li Jinyun Fu Xiaoyun Du Jingmin, et al (53)
Analysis of inverse kinematics for three-branch space robot with redundancy
…………………………………………………………………………………………… Ye Ping Sun Hanxu (58)
Experimental research on empirical model of flow coefficient of electronic
expansion valve……………………………………… Zhang Chuan Ma Shanwei Chen Jiangping, et al (63)
Experimental analysis on separation point moving of boundary layer in
centrifugal slurry pumps………………………………… Zhu Yucai Zhang Mengtao Zhang Yongli, et al (70)
Universality analysis method of parts for product family based on
complex network……………………………………………… Liu Fuyun Yang Qinghai Qi Guoning, et al (75)
Application of Engineering Technology
Optimal method of auto-body closure panels fitting combining
influence of welding thermal effects…………………………… Zhu Wenfeng Lai Xinmin Wang Hao, et al (80)
Stereolithography rapid prototyping indirect fabrication approach of scaffolds
with controlled microstructure……………………………………… Li Xiang Li Dichen Lu Bingheng, et al (86)
Stage control and nonlinearites of digital valves
………………………………………………………………………… Ruan Jian Li Sheng Pei Xiang, et al (91)
Annlysis of subcycling algorithums for computer simulation
of crashworthiness………………………………………………Gao Hui Li Guangyao Zhong Zhihua, et al (98)
Reliability-based robust design of vehicle components with
non-normal distribution parameters……………………… Zhang Yimin He Xiangdong Liu Qiaoling, et al (102)
Parametric modeling of the arc sound in GMAW for
on-line quality monitoring………………………………… Ma Yuezhou Chen Jianhong Liang Weidong (109)
Experimental investigation on flow fields in outlet divergent passage
of vertical axial-flow pump……………………………………Qiu Baoyun Huang Jiyan Lin Haijiang, et al (115)
Analysis of wheel/rail two-point contact by using finite element method
………………………………………………………………………………………… Liu Yingxi Zhang Jun (121)
Reverse educing method of bulge-blank based on equipotential field
………………………………………………………………………… Li Chao Li Fuguo Zhang Ying, et al (127)
Global optimization of positioning strategy for NC flank milling undevelopable
ruled surfaces……………………………………………………………………Gong Hu Cao Lixin Liu Jian (134)
Instability problem of sheet metal dieless incremental forming based on
point bolster……………………………………………………… Mao Feng Mo Jianhua Huang Shuhuai (140)
Geometric parameters extraction of sphere, cylinder and cone
…………………………………………………………………Liu Yuanpeng Zhang Dinghua Ao Bo, et al (144)
Analysis of random vibration chracteristics and verification of track sructrue
on frequency domain method…………………………………Wang Kaiyun Cai Chengbiao Xu Zhisheng (149)
Optimization on initial cable tensions and number of cables for a cablenet deployable
spaceborne antenna………………………………………… Di Jiejian Duan Baoyan Yang Dongwu, et al (153)
Predictive modeling of surface roughness and cutting parameters optimization
in ultra-precision turning based on genetic algorithm…………………………… Lu Zesheng Wang Minghai (158)
Unsteady flow characteristic within single channel pump
………………………………………………………………………………… Chen Hongxun Zou Xuelian (163)
Development of a new hot forming technology for heavy retaining rings
…………………………………………………… Guo Huiguang Liu Jiangsheng Yang Chaocao, et al (171)
Dynamic shift schedule with 3-parameter based on neural network model of engine
…………………………………………………………………Yin Xiaofeng Tan Jingxing Lei Yulong, et al (174)
Performance of nitrogen explosion hydraulic percussion hammer based on
measurement of expanded Kalman filter………………………… Ye Jinjie Pan Ziwei Sun Baoqiang, et al (179)
Theoretical and experimental research on corrugated sleeve’s
working characteristics………………………………………………… Wang Liandong Qiu Lanfang, et al (184)
Modeling and optimization of springback with contact evolution in
sheet metal forming……………………………………………… Chen Lei Yang Jichang Chen Wei, et al (189)
Fabrication of PDMS microfluidic chip by wet etching silicon
…………………………………………………………Zhang Feng Zhang Hongyi Zhou Yongliang, et al (194)
Reconstruction of surfaces from contours
………………………………………………………………………Jia Chao Nie Shaomin Chen Fei, et al (199)
Analysis on magnetic field of electromagnet for electric brake
………………………………………………………… Li Zhongxing Zhou Kongkang Xu Haichun, et al (203)
Fully digital control system for CO2 short-circuit welding
……………………………………………………………………… Feng Yuehai Liu Jia Yin Shuyan, et al (207)
Surface fitting for scattered data and application in automotive body reconstruction
………………………………………………………………… Lan Fengchong Chen Jiqing Lin Jianguo (213)
Optimization design of mini car crashworthiness structure
……………………………………………………………… Deng Zhaoxiang Hu Yumei Wang Pan, et al (217)
Design of the pitch curves of noncircular gears for quick return mechanism
………………………………………………………………………Guo Chengzhi Fu Wei Zhu Jucai, et al (221)
Sub-pixel technique in ring light method
………………………………………………………………………Zheng Jun Zhang Wei Shi Keren, et al (228)
Content of Chinese Journal of Mechanical Engineering indexed by Engineering Index (EI)
(Vol.41, No.4, 2005)……………………………………………………………………………………………… (85)
The content prediction of Chinese Journal of Mechanical Engineering (English Edition),
Vol.18, No.4, 2005………………………………………………………………………………………………… (234)
|