实施重大科技专项, 促进企业自主发展………………………………………………………万 钢 许 倞 (1)
Power balance strategy of powertrain in fuel cell vehicle
…………………………………………………………………… Sun Zechang Wei Xuezhe Zhong Zaimin (3)
Energy management strategies for fuel cell hybrid electric vehicle
……………………………………………………………………… Lu languang He bin Ouyang Minggao (8)
Study on control strategy and simulation for parallel hybrid electric vehicle
……………………………………………………………… Zhao Ziliang Liu Dongqin Liu Minghui, et al (13)
Road test for dynamic and economy performance of hybrid electric vehicle
………………………………………………………………………Feng Qishan Yin Chengliang Zhu Yu (19)
Pure electric city bus structure and design
………………………………………………………………… Lin Cheng Wang Wenwei Sun Fengchun (25)
VCU development for fuel cell hybrid bus with V-type precedure
………………………………………………………………Li Jianqiu Tian Guangyu Lu Qingchun, et al (30)
Coordinated powertrain control method for shifting process of automated mechanical
transmission in the hybrid electric vehicle…………………… Liao Chenglin Zhang Junzhi Lu Qingchun (37)
Present researching status and advancement of management system of direct-hydrogen
proton-exchange-membrane fuel cell engines…………Chen Wenmin Bao Cheng Ouyang Minggao, et al (42)
Influence of dynamic controlling the operation parameters on 100 kW fuel cell power
sysytem efficiency and performance stability……………………Hu Liqing Xia Jianwei Fu Mingzhu, et al (48)
Development of a 20 kW fuel cell engine for research
……………………………………………………………………Wu Jieyun Lu Languang Feng Wei, et al (54)
Use of simulation technology on the construction design of nickel hydride metal piles
…………………………………………………………… Pan Hongbin Zhao Jiahong Feng Xiazhi, et al (58)
Study on estimating of the state of charge of Ni/MH battery pack
for electric vehicle………………………………………… Wang Junping Chen Quanshi Lin Chengtao (62)
Influence of surface modification and additives on the performance of high
power Ni-MH batteries…………………………………………………Chen Shi Wu Feng Yang Kai, et al (66)
High density brushless permanent magnet traction motor
for fuel cell vehicles………………………………………… Huang Surong Zhang Qi Xie Guodong, et al (69)
Comparison study of current input equivalent circuit models of electrical vehicle
battery……………………………………………………………… Lin Chengtao Qiu Bin Chen Quanshi (76)
Performance analysis of pure electric vehicle with ultra-capacitors
…………………………………………………………………… Wang Zhifu Chen Wei Ye Huiping, et al (82)
Effectiveness of regenerative braking for electric car in beijing
……………………………………………………………………… Qiu Bin Chen Quanshi Zhang Kaibin (87)
Development and application of the module structure of in-wheel-motor and double-wishbone
suspension with torsion bar………………………………………… Chen Xinbo Wan Gang Li Yan, et al (92)
Testing and analysis of driving cycle for Wuhan city bus
…………………………………………………………………………Luo Yuan Wang Jie Wang Yousong (96)
Robust identification of diesel auxiliary power unit for series hybrid electric vehicles
…………………………………………………………………… He Bin Cao Guijun Ouyang Minggao (101)
Basic Theory
New approach to mechanical kinematic scheme generation based on multi-granularity
co-evolutionary function reasoning………………………………Xiao Renbin Liu Yong Mei Shunqi, et al (108)
Bayesian demonstration test method for failure rate under Weibull distribution
………………………………………………………………………Chen Wenhua Cui Jie Pan Jun, et al (118)
Design and fabrication of PLLA/CPC hardening scaffold
……………………………………………………… Xu Shanglong Li Dichen Chen Zhongzhong, et al (122)
Research on high-precision time-grating displacement sensor
………………………………………………………Peng Donglin Liu Xiaokang Zhang Xinghong, et al (126)
Influence of control ambit parameter CAP for reliability analyses of large type steel
structure system………………………………………………………………… Xu Gening Yang Ruigang (130)
Evaluation for energy saving effect and simulation research on energy saving of hydraulic
system in hybrid construction machinery…………………… Wang Qingfeng Zhang Yanting Xiao Qing (135)
Inversion of thermal conductivity during welding by simulation and measurments
…………………………………………………………………Tao Jun Li Dongqing Fan Chenglei, et al (141)
Application of Engineering Technology
Incipient fault intelligent monitoring and diagnosis based on fuzzy support
vector data description……………………………………………Hu Qiao He Zhengjia Zi Yanyang, et al (145)
Study on single camera stereo vision sensor
……………………………………………………………………………………………Zhu Jigui Li Yanjun (151)
Key technology of moving system of lunar rover with planetary wheel
……………………………………………………………… Gao Haibo Deng Zongquan Hu Ming, et al (156)
Influence of airbag folding pattern on deployment loads using virtual testing technique
…………………………………………………………………… Wan Xinming Yang Jikuang Shen Bin (162)
Adaptive LQG control for the electric power steering system of an automobile
…………………………………………………………………Chen Wuwei Wang Yan Wang Qirui, et al (167)
Development of continuous taper extrusion process
…………………………………………………………… Hu Shuiping Li Shaofeng Ren Xueping, et al (173)
Error separation and compensation technology of axisymmetric aspheric machining
……………………………………………………… Huang Hao Guo Yinbiao Wang Zhenzhong, et al (177)
3D optimum design of reversible axial flow fan with S-type blade
…………………………………………………………………………………………………Huang Diangui (182)
Fractal fault diagnosis and classification to modal characteristic of rotor system
………………………………………………………………… Xu Yuxiu Zhong Jianjun Wen Bangchun (186)
Mechanical design of reconfigurable planetary rover
……………………………………………………………………… He Xinyuan Ma Shugen Li Bin, et al (190)
Accurate extraction for the characteristic information of transient signal
with wavelet transforms…………………………………………Zhu Hongjun Wang Zhong Qin Shuren (196)
Springback in the bending of tailor welded blanksin theory and experiment
……………………………………………………… Jiang Yinfang Yuan Guoding Yang Jichang, et al (200)
Magnetic circuit of electromagnet in drum-type electro-magnet brake for vehicles
………………………………………………………………Quan Li Chen Zhaozhang Yang Zebin, et al (205)
CAD system of roller for involute spline and simulation of grinding process
…………………………………………………………………… Cui Fengkui Li Yan Zhou Yanwei, et al (210)
Novel compound-sphere-joint and its application in parallel machine tool
…………………………………………………………………… Zhang Lijie Li Yongquan Huang Zhen (216)
Research on fault diagnosis technology of low speed and heavy duty equipments
based on wavelet analysis……………………………………… Gao Lixin Zhang Jianyu Cui Lingli, et al (222)
Pattern recognition by fusion of directional basis function and
probabilistic neural network…………………………………… Luo Xiongbiao Chen Tiequn Wan Ying (228)
Clutch engagement control during gear shifting process in automated manual transmission
…………………………………………………………………… Cao Guijun Ge Anlin Zheng Lei, et al (234)
Content of Chinese Journal of Mechanical Engineering indexed by Engineering Index (EI)
(Vol.41, No.5, 2005)……………………………………………………………………………………………… (36)
国家自然科学基金重点资助项目成果简介…………………………………………… (57, 75, 107, 121, 144, 215)
|