Basic Theory
Elastic wave band gaps in flexural vibrations of straight beams
………………………………………………………………………Wen Jihong Yu Dianlong Wang Gang, et al (1)
Study on similar diagnal dynamic neural network hysteresis model for
piezoceramic actuator based on Preisach model………………………………………Dang Xuanju Tan Yonghong (7)
Structural optimal design of heat conductive body with topology optimization method
……………………………………………………………… Zuo Kongtian Chen Liping Zhang Yunqing, et al (13)
Nvestigation of nanomanufacturing process by molecular dynamics simulation
based on symplectic algorithm………………………………………… Han Xuesong Wang Shuxin Yu Siyuan (17)
Kinematic structural synthesis of 3-translational weakly-coupled parallel
echanisms based on hybrid chains……………………………………… Shen Huiping Ma Luzhong Yang Tingli (22)
Study on flow field in blade inlet of large vertical axial-flow pump and
its influence on pump………………………………………………Qiu Baoyun Lin Haijiang Huang Jiyan, et al (28)
Micro contact process analysis in abrasive wear by finite element method
…………………………………………………………………………Fan Yujin Yang Xiaojing Li Zhekun, et al (35)
Transmission matrix method for multi-dimensional vibration analysis of
complex mechanical systems……………………………………………………………Sun Lingling Song Kongjie (38)
Research on period-doubling bifurcation and chaos hiberarchy in gear system
……………………………………………………………………Gao Zhiying Shen Yunwen Dong Haijun, et al (44)
Design method for vibration uncoupling of powerplantmounting system
…………………………………………………………………………………………… Lü Zhenhua Fan Ranglin (49)
Power optimization of a real closed intercooled regenerated gas turbine cycle
……………………………………………………………………… Wang Wenhua Chen Lingen Sun Fengrui (55)
Design and calibration for high-pressure rotational rheometer of high
viscous and dense material……………………………………………… Yang Xiaopu Zhao Xueyi Jin Yun, et al (59)
Study on the arrangement -angle of the secondary source on the performance
of active noise control in ducts……………………………………Yi Shanzhen Fei Renyuan Zhou Dasen, et al (63)
Study of mathematical model of permanent magnet bearings
………………………………………………………………………………… Sun Lijun Zhang Tao Zhao Bing (69)
Application of Engineering Technology
Ultra-precision alignment based on differential moire technique
……………………………………………………………………… Wang Li Lu Bingheng Ding Yucheng, et at (75)
Research on technology of design retrieval based on fuzzy customer requirement
………………………………………………………………………Tan Jianrong Qi Feng Zhang Shuyou, et al (79)
Modular product configuration design for customer requirement-driven engineering
…………………………………………………………… Wang Haijun Sun Baoyuan Zhang Jianming, et al (85)
Simulation on dual hydraulic free piston engine
……………………………………………………………………… Zhou Sheng Xu Bing Yang Huayong, et al (92)
Research on BOM views and BOM view mapping model
……………………………………………………………………………………… Huang Xuewen Fan Yushun (97)
Connotation state of the art and research tendency of reverse supply chain logistics
…………………………………………………………………………………………………… Xia Xuhui Liu Fei (103)
Heat source model for twin wire welding
……………………………………………………………… Meng Qingguo Fang Hongyuan Xu Wenli, et al (110)
Analysis on mechanics characteristic for deep-drawing process of panel parts
……………………………………………………………………………… Li Zan Dong Xianghuai Li Jianjun (114)
Machine fault diagnostics based on Wigner-Ville high-order spectra
…………………………………………………………………………… Li Zhinong He Yongyong Chu Fulei (119)
Study on statistically optimal cylindrical near-field acoustical holography
………………………………………………………………………………Li Weibing Chen Jian Yu Fei, et al (123)
Hardness and modulus of elasticity of brush plated nickle coating by nanoindentation testing
……………………………………………………………………Wang Hongmei Xu Binshi Ma Shining, et al (128)
Research of a 3D static micro-mixer with staggered oriented ridges
………………………………………………………………………………… Liu Sufen Fu Xin Yang Huayong (132)
Low stress macroscopic plasticbehavior of coated part under repeated impact contact load
……………………………………………………………… Shi Shihong Fu Geyan Ouyang Basheng, et al (137)
Research on a Web-based CAE system for mass customization product and it’s application
………………………………………………………………… Hou Liang Yan Huangping Chen Yongming (143)
Research on the scheduling problems of the warehousing system based on
hierarchical colored petri nets…………………………………………Tian Guohui Zhang Pan Tian Wei, et al (148)
Bionic design and 3D flow analysis of artificial bone microtubules and fabrication
based on cell attachment……………………………………………… Xu Shanglong Li Dichen Lu Bingheng (154)
Dynamic self-reconfiguration of underactuated redundant manipulators
……………………………………………………………… He Guangping Yang Zeyong Fan Chunhui, et al (158)
Analysis of profiling plunge shaving cutter on shaving machine
…………………………………………………………………………………Wang Suyu Yu Tao Sun Jingyou (163)
Modeling of precision grinding process based on micro- positioning table and
error compensation technology……………………………… Tian Yanling Zhang Dawei Chen Huawei, et al (168)
Laser truing and dressing of bronze-bonded diamond grinding wheels by
a Q-switched YAG pulse laser………………………………………… Chen Genyu Li Lijun Ma Honglu, et al (174)
Rsearch on automatic inspection techniques of real-time radiography for turbine –blade
…………………………………………………………………… Zhou Zhenggan Zhao Sheng An Zhengang (180)
Magnetic field characteristic and magnetic pressure distribution in tube
electromanetic expansion………………………………………… Zhao Zhiheng Li Chunfeng Li Jianhui, el al (185)
Research on a unified criterion of internal and external wrinkling of strip metal in-plane
bending under unequal compressing…………………………………… Feng Lu Yang He Sun Zhaoyang, et al (189)
Analysis of gas jet diffused feature in gas-assisted injection molding
………………………………………………………………………………… Liang Jicai Wu Boda Li Yi, et al (195)
Material parrameter identification and optimal technological parameter prediction for intelligent control
of V-shape free bending process of wide sheet metal………………… Guan Yingping Zhao Jun Su Chunjian (199)
Calculation method of the increasing coefficients for low specific-speed centrifugal pump
……………………………………………………………………………………… Yang Junhu Zhang Renhui (203)
Research on turning chatter prediction control based on electrorheological effect
………………………………………………………………… Zhang Yongliang Yu Junyi Hou Dongxia, et al (206)
Mirostructural evolution and wear mechanism of WC-Co based alloy used for guide roller
in the process of steel rolling……………………………………… Zhu Yuanzhi Lin Qiquan Yin Zhimin, et al (212)
Quadratic diagonal reccrrent neural network and applications in following control
of warship-guns……………………………………………………………… Zhou Lianquan Wang Xiaochun (215)
Hybrid neural networks based portal cranes’ luffing system optimal design
…………………………………………………………………………………………… Xu Xuesong Hu Jiquan (220)
Research on approach to develop mathematical model of general external charact eristic
of fluid coupling…………………………………………………………… Wang Yongsheng Ding Jiangming (225)
Study on eliminating the superfluous force of marine electrohydraulic load simulator applied
with dual-valve parallel connected control…………………………… Wang Jingfu Ye Zhengmao Li Hongren (229)
Study and simulation of torch track for the flame NC pipe cutting machine
…………………………………………………………… Xiao Juliang Yan Xiangan Wang Guodong, et al (234)
Content of Chinese Journal of Mechanical Engineering indexed by Engineering Index (EI)
(Vol.40, No.4, 5, 2004)…………………………………………………………………………………………… (62, 102) |