Basic Theory
Research on transmission principle and rinematic analysis for involut spherical gear
…………………………………………………………………………………………Pan Cunyun Wen Xisen (1)
Speed ratio model and stress analysis on toroidal CVT
……………………………………………………………… Qin Datong Shi Wankai Yang Changqi, et al (10)
Method for sound signal characteristic extrction based on modal analysis
and its application………………………………………………… Ma Weijin Xiong Shibo Xiong Xiaoyan (15)
Signal processing system of the new robotics sensitive skin
…………………………………………………………………………Cao Zhengcai Fu Yili Wang Shuguo (21)
Dynamics of the flexible multi-body systems in consideration of
environment characteristic………………………………………… Yun Jintian Wang Shuxin Ding Jienan (26)
Nonlinear control methods of automotive semi-active suspension
based on the MR damper……………………………………………………………… Li Yinong Zheng Ling (31)
Based on the reynolds stress differential models simulating of tip clearance
flow in Kaplan turbine……………………………………………… Liao Weili Xu lianfeng Liu Shengzhu (38)
Analysis for dependency of common cause failure and probability prediction
in redundant structral systems……………………………………… Zhou Jinyu Xie Liyang Wang Xuemin (44)
Fatigue life prediction based on dynamic response finite element simulation
for spot-welded joint………………………………………………………… Shang Deguang Wang Ruijie (49)
Wave theory modeling of vehicle vibration and its frequency response analysis
of helical spring suspension……………………………………………………… Fu Chaoxing Wang Xiulun (54)
Real-time velocities estimation of a wheeled mobile robot
…………………………………………………………………………… Song Yixu Jia Peifa Tan Dalong (60)
Quality of welding structure essential component analyzing
…………………………………………………………………… Zong Pei Cao Lei Shao Guoliang, et al (65)
Construction of non-four-sided patches and application in autobody design
………………………………………………………………… Chen Jiqing Lan Fengchong Lin Jianguo (69)
Parametric study of the honeycombed rotary desiccant dehumidifier —
hump analysis and wave analysis………………………………Zhang Xuejun Dai Yanjun Wang Ruzhu (74)
Precision evaluation oriented parameter identification of PKM tools
……………………………………………………………………… Gao Meng Li Tiemin Ye Peiqing, et al (79)
Simulation of 3D steady state edge slab rolling by the RKPM meshless method
………………………………………………………… Cui Qingling Liu Xianghua Wang Guodong, et al (84)
Study on the problem of product reliability based on chance constained programming
……………………………………………………………… Zhao Yanwei Huang Fengli Zhang Guoxian (89)
Adaptation compensation of hydraulic servo control system
……………………………………………………………Zhang Fei Tong Chaonan Peng Kaixiang, et al (94)
Knowledge express and integrated reasoning mechanism in intelligent system
………………………………………………………………………………Wu Kui Li Runfang Liu Jinghao (98)
Modular computation method for inverse kinematics and dynamics
of spatial parallel manipulator………………………………… Yang Jianxin Wang Jinsong Yu Dingwen (104)
Application of Engineering Technology
Bionic research on concertina motion of a snake-like robot
…………………………………………………………………… Liu Jinguo Wang Yuechao Li Bin, et al (108)
Experimental investigation of crack identification for the cantilever beam based on
wavelet finite element methods……………………………… Li Bing Chen Xuefeng Xiang Jiawei, et al (114)
BP network control over the track of working device of hydraulic excavator
………………………………………………………………………Lü Guangming Sun Lining Xue Yuan (119)
Design and realization of humanoid robot hand
…………………………………………………………… Zhang Wenzeng Chen Qiang Sun Zhenguo (123)
Control pressure characteristics of nozzle flapper valve based on GMA
……………………………………………………………………… Wang Chuanli Ding Fan Fang Ping (127)
Robust structure design for MEMS filtrers in telecommunication
……………………………………………………………………………… Li Pu Yang Hua Fang Yuming (132)
Control and design for semi-active suspension
……………………………………………………… Chen Long Jiang Haobing Zhou Kongkang, et al (137)
Dimensional model and performance atlas of the 3-RUU micro-motion parallel mechanism
………………………………………………………… Li Jianfeng Wu Guangzhong Fei Renyuan, et al (142)
Influence of Mn and Si on mechanical properties of pearlitic steels after severely
cold rolling and annealing……………………………………Sun Shuhua Zhang Zhenrong Xiong Yi, et al (147)
Experimental research on the high-speed precision shearing of metal bar
………………………………………………………………… Fu Jianhua Li Yongtang Lei Bufang, et al (154)
Automobile rinse method based on vortex tube making heat principle
………………………………………………………………………………… He Zhongtao Luo Guanwei (157)
Modal parameters identification based on Gauss filter and Hilbert transform
…………………………………………………………………………………… Liu Shaokui Yan Guirong (161)
Feed and pour region optimization methods in machining fixation system of paper honeycomb parts
……………………………………………………………………………………… Ke Yinglin Wu Fuzhong (165)
Application of neural network and genetic algorithm to inverse solution
of parameters of drawbead………………………………………… Han Lifen Gao Hui Li Guangyao, et al (171)
Study of material accumulated deformation uniformity of equal channel angular
multi-pass pressing process…………………………………………………………Zhao Guoqun Xu Shubo (177)
Equilibrium performance of rubber hose elbow subjected to inner pressure
…………………………………………………………………… Shuai Changgeng He Lin Lü Zhiqiang (182)
Measuring two-dimensional temperature field based on digital image processing technique
…………………………………………………………………………………………… Liu He Zhu Weibo (186)
Energy-saving, fast response and high accuracy electrohydraulic control system
…………………………………………………………………………………… Chen Baojiang Cao Fan (191)
New method for evaluating the depth of hardened zone obtained through laser quench
………………………………………………………………………… Ye Yunxia Zhang Yongkang Li Jin (196)
Customer-oriented quality improvement in mass customization
………………………………………………………………………………Tang Xiaoqing Wang Xuecong (200)
Study and develop of snake-robot with concertina-locomotion
………………………………………………………………Zhang Jiafan Yang Canjun Chen Ying, et al (205)
Generating mechanism and controlling technique on surface deflection
of cylinder shallow shells………………………………………………………Sun zhenzhong Yang Yuying (210)
Trajectory planning of posture adjustment of welding mobile robot during
auto-searching weld line………………………………………………Zhang Ke Wu Yixiong Jin Xing, et al (215)
Direct method for limit velocity of a semi-circle curved pipe conveying fluid
…………………………………………………………… Zhang Dunfu Wang Xiping Zhang Hongwei (221)
Analyzing of different working conditions on small style heat pumps
which are used in desalination……………………………………………………………………………Zhao Li (225)
Research on the randomization of random test in vibration control system
………………………………………………………………………… Wang Shucheng Chen Zhangwei (230)
The content prediction of Chinese Journal of Mechanical Engineering (English Edition),
Vol.18, No.2, 2005……………………………………………………………………………………………… (234)
Content of Chinese Journal of Mechanical Engineering indexed by Engineering Index (EI)
(Vol.40, No.6, 2004)………………………………………………………………………………………… (37, 118) |