Overview
Review of research of cam mechanisms in China
……………………………………………………………………… He Wei Cao Jujiang Yang Fulian, et al (1)
Basic Theory
Fundamentals and categorization of metamorphic mechanisms
…………………………………………………………………………Dai Jiansheng Ding Xilun Zou Huijun (7)
Finite element approach to dynamical modeling of robot mechanism
………………………………………………………………Chu Zhongyi Qu Dongsheng Sun Lining, et al (13)
Functional structure design model based on the symbiotic evolutionary theory
……………………………………………………………… Chen Yong Feng Peien Pan Shuangxia, et al (19)
Research on yield strength in grinding surface layer of a low carbon martensite
stainless steel 0Cr13Ni4Mo…………………………………… Ma Suyuan Chen Rui Wang Donglin, et al (25)
Effects of phase-field parameters on sidebranching using phase field simulation
………………………………………………………Zhu Changsheng Wang Zhiping Liu Baicheng, et al (30)
Research on the surface localized vibration modes in one dimensinal phononic crystals
composed of rod structures………………………………… Yu Dianlong Liu Yaozong Wang Gang, et al (35)
Study on feature extraction of friction influence from servo current
……………………………………………………………Xi Zhuyan Lu Changhou Zhang Jianchuan, et al (39)
Contact performnace analysis of double enveloping TI worm gearing based on contact lines
………………………………………………………………Sun Yuehai Duan Luqian Wang Shuren, et al (44)
Determination of comparability criterion of hydrodynamic characteristics for cylindrical
metal rubber porous material……………………………… Xia Yuhong Jiang Hongyuan Ao Hongrui, et al (50)
Study of rotor interference in screw compressors based on three dimensions
……………………………………………………………………………………… Xiong Wei Feng Quanke (55)
Modeling and control of a-3 DOF parallel wire driven flexible manipulator
………………………………………………………………Sui Chunping Zhang Bo Zhao Mingyang, et al (60)
Analysis for common cause failure and reliability model in multi-state systems
…………………………………………………………………………Zhou Jinyu Xie Liyang Wang Xuemin (66)
Effecient inverse kinematic solution for redundant manipulators
……………………………………………………………………………… Zu Di Wu Zhenwei Tan Dalong (71)
Simplification and determination of polytropic exponent of thermodynamic process in the filling and exhausting
process in a pneumaitic system…………………………………Jin Yingzi Zhu Zuchao Yang Qingjun, et al (76)
Theoretical formulae for the meshing analysis of point-contact tooth surfaces of hypoid gears
……………………………………………………………………… Wu Xuncheng Hu Ning Chen Zhiheng (81)
Effect of second phase particles on microstructure and toughness of CGHAZ
in Ti-Nb microalloyed steel…………………………………Qi Xiaogang Chen Maoai Chen Junhua, et al (86)
Dynamical study on aggregated chain in magnetorhelogical subjected rotational field
……………………………………………………………………………………………………… Wang Ruijin (93)
Application of Engineering Technology
Full conjugate gradientalgorithm in the neural network soft measurement system of dynamic flow
…………………………………………………………………Wang Yiquan Tang Yong Jiang Wanlu, et al (97)
Application of Hilbert-Huang transform method to gear fault diagnosis
…………………………………………………………………………Yu Dejie Cheng Junsheng Yang Yu (102)
Research on the control of electric power steering system considering the dynamics
and inverse dynamics………………………………… Wang Qidong Yang Xiaojian Chen Wuwei, et al (108)
Reconstruction technique of 3D complex groove of milling insert based on genetic algorithms
……………………………………………………………Li Guanghui Liu Guangjun Tan Guangyu, et al (113)
Linear characteristics of refrigerant flow through adiabatic capillary tubes
………………………………………………………………………………………………… Zhang Chunlu (118)
Numerical simulation for precision roll forging of automobile front axle
……………………………………………………………………Jiang Peng Fang Gang Hu Furong, et al (123)
Control of automotive suspensions vibration via magneto rheological damper
………………………………………………………………………… Li Rui Yu Miao Chen Weimin, et al (128)
Image processing and edge detection on multi-pass image
……………………………………………………………… Huang Junfen Yin Shuyan Zou Yong, et al (133)
Research of customers oriented virtual design environment
……………………………………………………………… Zhou Ziqiang Shen Lianguan Li Mujun, et al (137)
Study on Markov model based reliability for distributed monitoring system
……………………………………………………………… Yi Pengxing Du Runsheng Yang Shuzi, et al (143)
Rectificaion of electrode orbiting in EDM based on general offset surface
…………………………………………………………………………………………Wang Gang Shan Yan (149)
Control of 3D micropositioning based on visual servoing
……………………………………………………………………………Xu Zheng Liu Chong Luo Yi, et al (153)
Coil fault-tolerant control for radial active magnetic bearings
……………………………………………………………… Wu Buzhou Sun Yanhua Wang Shihu, et al (157)
Environmental impact evaluation method of manufacturing processes and its case
………………………………………………………………… Cao Huajun Liu Fei Yan Chunping, et al (163)
Analysis on dynamic characteristics of giant magnetostrictive thin films
……………………………………………………………Zhang Yongshun Liu Guangjun Jia Zhenyuan (168)
Multi-objective optimization and simulation of supply chain
………………………………………………………………………………………Ma Xuefen Sun Shudong (174)
Automatic generation of 3D assembly dimension chains
………………………………………………………………… Wang Heng Ning Ruxin Tang Chengtong (181)
Theoretical calculation and experimental study on the wind loss of the energy storage flywheel
…………………………………………………………………… Wei Haigang Dai Xingjian Shen Zupei (188)
Development of an intelligent apparatus of testing the quality parameters of green sand
……………………………………………………………… Shi Dequan Li Dayong Dong Jingwei, et al (194)
Influence of ultrasonic vibrated diamond tool on the critical depth of cut of brittle materials
……………………………………………………………… Ma Chunxiang Wang Yan Shamoto E, et al (198)
Research on ESMAA-actuated multi-fingered robot hand
…………………………………………………………………………………………Yang Kai Gu Chenglin (203)
Motion planning and control of underactuated redundant manipulators with obstacle avoidance
………………………………………………………………… He Guangping Lu Zhen Wang Fengxiang (208)
Finite element optimization of machining fixture layout of thin-walled arc workpiece
……………………………………………………………………Wang Yunqiao Mei Zhongyi Fan Yuqing (214)
Laboratory and field study of enhancing cavitation effect with self-resonating nozzle
under ambient pressure…………………………………………… Yi Can Li Gensheng Zhang Dingguo (218)
Effective hybrid procedures based on evolutionary algorithms and simulated annealing
algorithms for job shop scheduling problems…………………………………… Pan Quanke Zhu Jianying (224)
Effect of stresses on micromachined z-axis vibrating rate gyroscope
………………………………………………………………… Qiu Anping Su Yan Wang Shourong, et al (228)
General steady state mathematical model for fin-and-tube heat exchanger based on graph theory
……………………………………………………………… Liu Jian Wei Wenjian Ding Guoliang, et al (233)
Content of Chinese Journal of Mechanical Engineering indexed by Engineering Index (EI)
(Vol.40, No.8, 2004)……………………………………………………………………………………………… (80)
《机械工程学报》荣获第三届国家期刊奖…………………………………………………………………… (107)
《机械工程学报》英文版投稿须知…………………………………………………………………………… (180) |