Overview
Dynamics of maglev vehicle/ guideway systems (part Ⅰ) ——magnet/rail interaction
and system stability………………………………………………………………Zhai Wanming Zhao Chunfa (1)
General depiction on the manufacture industry cost design theory
and its method in China……………………………………………………………………………… Li Jianming(11)
Basic Theory
Numerical simulation of flow field in a microaxial blood pump
……………………………………………………………………Zhao Chunzhang Zhang Xiwen Bai Jing (19)
New method for fuzzy robust design based on percentile
formulation design rules…………………………………………………………… Liu Chuntao Lin Zhihang (24)
Study and amend of the flow and tube wall temperature change correlation in heat exchanger
……………………………………………………………Wang Zhiguo Zhang Dewen Xiang Xinyao, et al (30)
Heat transfer characteristics of gas slip flowing in unsymmetrically heated
rectangular microchannels…………………………………………………Zhu Xun Liao Qiang Xin Mingdao (34)
Research on loss of controllability of Stewart parallel mechanism
at bifurcation points…………………………………………Wang Yuxin Wang Yiming Chen Yushu, et al (40)
Investigation of forming limit stress diagrams of sheet metals
…………………………………………………………………………………… Xie Ying Wan Min Han Fei (45)
Property analysis of free vibration of helical planetary gear trains
……………………………………………………………… Yang Tongqiang Song Yimin Zhang Ce, et al (50)
Approximate analysis of stress in main deformation area for a rectangular box
…………………………………………………………………………… Ma Lixia Wang Fengqin Zhao Jun (56)
General method of determination of rotational conicoid profile error
……………………………………………………………… Tian Shijie Guo Junjie Jiang Zhuangde, et al (62)
Numerical simulation of the three demensional fluid flow and heat transfer of heat exchanger
tubes with twisted-tape insert…………………………………Zhang Lin Qian Hongwei Xuan Yimin, et al(66)
Application of heuristic simulation optimization technique on design
of autonomous manufacturing island………………………………………………………Shen Bin Chen Wei (71)
Some propositions related to extreme position angle of crank-rocker mechanisms
and their applications…………………………………………………………… Qian Ruiming Liu Qingyun (80)
Application of Engineering Technology
Knowledge discovery of preferential process based on extented rough set model
………………………………………………………… Wang Zhonghao Shao Xinyu Zhang Guojun, et al (84)
Three dimensional numerical analysis for slotted fin-and-tube heat transfer surfaces
having oval tube configuration…………………………………………………… Zhou Junjie Tao Wenquan (90)
Optimal kinematic design of 2-DOF planar parallel robot with high speed
and high precision…………………………………………………… Sun Lining Ding Qingyong Liu Xinyu (94)
Scanning mode of the metal powder laser shaping
………………………………………………………… Shang Xiaofeng Liu Weijun Wang Tianran, et al (99)
Jetting phenomenon in the process of injection molding for heavy alloy tungsten ball
…………………………………………………………………………………… Jiang Bingyan Zhong Jue (103)
Experimental study on model of negtive control of hydraulic system
…………………………………………………………………………………… Cao Feng Panshuangxia (107)
Generic approach to generating variational geometry of holes
in three demensional CAD systems……………………………Liu Yusheng Gao Shuming Cao Yanlong (112)
Elastic-plastic constitutive relation with hybrid hardening and application
in cold ring rolling simulation…………………………………………Li Hongwei Yang He Guo Ling, et a (119)
Multiple infant cracks detection for beam-type structures by wavelet
finite element method…………………………………………… Chen Xuefeng Li Bing Zi Yanyang, et al (126)
Hysteresis nonlinearity modeling and control of giant magnetostrictive actuator
……………………………………………………………………Jia Zhenyuan Wang Fuji Zhang Ju, et al (131)
Recurrent fuzzy-neural network control on the substrate temperature of the large-area hot
filament chemical vapor deposttion system………………… Song Shengli Zuo Dunwen Xu Feng, et al (136)
Which is based on the involute spherical gear construction and kinematics analysis
of the robot’s flexible wrist…………………………………………………………Pan Cunyun Wen Xisen (141)
Self-excited vibration diagnosis of the rolling mills and structure dynamics modification
…………………………………………………………… Xiong Shibo Wang Ranfeng Liang Yiwei, et al (147)
Behavior of oxide film and elimination of microvoid during vacuum-free vibration liquid phase
diffusion bonding of SiCp/ZL101A composites………………………Xu Huibin Yan Jiuchun Yang Shiqin (152)
Stiffness analysis and design of 2-DOF planar parallel manipulator
………………………………………………………………… Chen Jun Wang Liping Zhang Hua, et al (158)
Generation method of automobile body assemly dimension chain
………………………………………………………… Zhou Jiangqi Chen Guanlong Lai Xinmin, et al (164)
Numerical simulation for temperature and flight velocity of atomized droplet of high velocity
arc spraying 3Cr13 stainless steel…………………………… Tian Baohong Xu Binshi Ma Shining, et al (169)
Partial-coherence method applied in cyclostationary signal analysis
…………………………………………………………………………………… Wan Quan Jiang Weikang (174)
Scheduling in flexible manufacturing line orienting matching production
………………………………………………………………………Zhao Ning Wu Chao Ning Ruxin, et al (180)
MR-damper F-v model decoupling control and hysteresis properties
………………………………………………………… Wang Enrong Chen Yushou Ma Xiaoqing, et al (186)
Online optimal modeling based on time window for calculation process
in rotary kiln………………………………………………………… Zhu Yanfei Wu Jianping Li Qi, et al (192)
Transient thermal stress analysis of functionally gradient material plate with temperature-dependent material
properties under convective heat transfer boundary……………… Xu Yangjian Zhang Jingjun Tu Daihui (198)
New technology for availability assessment of large capacity
thermal power equipments…………………………………………………… Shi Jinyuan Yang Yu Wei Qi(205)
Vector-lead method for surface finite element mesh generateion
……………………………………………………………… Du Qungui Liu Shudao Ye Bangyan, et al (211)
Effect of the magnetic strain vibration in residual stress reduction by pulsed magnetic treatment
……………………………………………………………………Cai Zhipeng Lin Jian Zhou Liang, et al (216)
Research on cushioning principle for high speed cylinder with self-adaptation capacity
…………………………………………………………………………… Li Zhe Wang Zuwen Bao Gang (221)
Modal analysis for fluid-structure interaction system of car cavity
…………………………………………………………………………… Ma Tianfei Lin Yi Zhang Jianwei (225)
Design of constant speed digital controller based on electro-hydraulic proportion techniqe
………………………………………………………………………………………………… Cheng Weibin (231)
带Theoretical analysis and experiment of sinking of tube with a moving mandrel
……………………………………………………………………… Teng Hongchun Lin Guixia Hu Ping (234)
Content of Chinese Journal of Mechanical Engineering indexed by Engineering Index (EI)
(Vol.40, No.9, 10, 2004)……………………………………………………………………………………… (29, 179)
《机械工程学报》英文版投稿须知…………………………………………………………………………… (157)
《机械工程学报》荣获第三届国家期刊奖…………………………………………………………………… (197) |