Overview
Methodology of design for product family……………………………………………… ZHU Bin JIANG Pingyu (1)
Key technologies of modern heavy die forging press……………LIN Feng YAN Yongnian WU Rendong, et al (9)
Development on crystal plasticity finite element modeling in metal forming
………………………………………………………………PI Huachun HAN Jingtao XUE Yongdong, et al (15)
Basic Theory
Reconfigurating policy of reconfigurable manufacturing systems based on graph theory
……………………………………………………………… LOU Hongliang YANG Jiangxin LIN Yafu, et al (22)
Reliability and check replacement policy of mechanical equipment under predictive
maintenance………………………………………………… LIU Baoyou FANG Youtong WEI Jinxiang, et al (30)
Lubrication characteristics of the water hydraulic sliding shoe pairs
……………………………………………………………………LIU Huanlong KE Jian WANG Guozhi, et al (36)
Study on two-phase flow of cell and cell suspension perfusion in artificial bone microtubules
……………………………………………………………………… XU Shanglong LI Dichen LU Bingheng (40)
Structural analytical approach to coupled design in design with axiomatic design
………………………………………………………………………… CAO Pengbin XIAO Renbin KU Qiong (46)
Reference model and key technology for human factors simulation in manufacturing systems
………………………………………………………………… ZHANG Xiaodong YANG Yu YI Shuping, et al (56)
Thermal deflection analysis of the solidified shell in the continuous casting of slab
……………………………………………………………………………… LIU Hongzhao WANG Zhongmin (64)
Bifurcation structure in parameter plane of gear system
…………………………………………………………… GAO Zhiying SHEN Yunwen DONG Haijun, et al (68)
Automated defects recognition technique based on multiple radiographic images
………………………………………………………………………………… ZHOU Zhenggan DU Yuanyuan (73)
Optimal method of structural parameters for hydraulic 6-DOF parallel platform
based on natural frequency…………………………………………………WANG Wei XIE Haibo FU Xin, et al (77)
Incomplete condensation of non-azeotropic working fluids in high temperature heat pumps
………………………………………………………………………………………………… GAO Pan ZHAO Li (83)
Research on swimming by undulatory long dorsal fin propulsion
…………………………………………………………………WANG Guangming HU Tianjiang LI Fei, et al (88)
Dispersion characteistics of passive analytes in a microfluidic slit
…………………………………………………………………………… ZHAO Zhiwen CHEN Xing LAM Y C (93)
Theoretical modification and experimental investigation on the flow equation for rotameter
………………………………………………………………………… SU Feng ZHANG Tao LIU Zhengxian (99)
Study on H∞ controller in super high-speed electro-hydraulic proportional system
…………………………………………………………………………… JIN Zhe KE Jian YU Lanying, et al (104)
Application of Engineering Technology
Method on the reuse of product design process based on affair-matter-element
………………………………………………………………… MA Hui ZHANG Shuyou TAN Jianrong, et al (110)
Development of a dual piston hydraulic free piston engine prototype and its
compression ratio………………………………………………… XIA Bizhong WANG Jinsong FU Xin, et al (117)
Slicing data processing and global optimization of feature curve in reverse engineering
………………………………………………………………………………………… LIU Yunfeng KE Yinglin (124)
Method for determining whether a certain point is inside a polygon in plane
………………………………………………………………………XIA Renbo LIU Weijun WANG Yuechao (130)
Effect of the deflecting ring on the noise generated by an air conditioner outdoor set
…………………………………………………………………………………… DING Guoliang HU Junwei (136)
Improved automatic reverse normal arithmetic……………………LANG Zhikui HU Ping ZHAO Yuqian, et al (142)
Different indexes cracks diagnosis to thin plate based on fuzzy neural networks
………………………………………………………………… ZHANG Jingfen MENG Guang ZHAO Deyou (145)
Effects of seal and internal damping on dynamic stability of liquid hydrogen turbopump
rotor system in rocket engine………………………………… BAI Changqing XU Qingyu ZHANG Xiaolong (150)
Displacement compounding control of piezoelectric micro-motion worktable
……………………………………………………………… CUI Yuguo DONG Weijie SUN Baoyuan, et al (156)
Topology optimization of multiple inputs and outputs compliant mechanism with
coupling terms control………………………………………………………ZHANG Xianmin CHEN Yongjian (162)
Controlling manipulator off-line using electromyography signals
………………………………………………………… LI Xingfei YANG Jingjing ZHANG Chenyang, et al (166)
Theoretical and experimental studies of longitudinal ultrasonic guided wave propagation
characteristics in water-filled pipes………………………… LIU Zenghua HE Cunfu YANG Shiming, et al (171)
Current controlled amplifier for piezo actuator and its experimental research
…………………………………………………………… CHEN Liguo RONG Weibin RU Changhai, et al (179)
Servo pump’s electrically driven variable displacement mechanism
…………………………………………………………………… GAO Bo FU Yongling PEI Zhongcai, et al (184)
Automatic generation and regeneration algorithm of hexahedral mesh
…………………………………………………………………ZHAO Guoqun YU Song WANG Guangchun (188)
Propeller with a blade and its motion characteristics
…………………………………………………………………………………… ZHANG Yuhua QIU Zhizhen (193)
Fully load characteristics of internal combustion water power system
………………………………………………………… ZHANG Jizhong ZHANG Tiezhu ZHAO Hong, et al (197)
Optimization design and test research for attitude simulating device of a docking
simulating test bed………………………………………… CHEN Zhigang WANG Wuyi ZHANG Guangyu (202)
Development of thin-film thermocouple for measurement of workpiece temperature in chemical
explosive material machining…………………………………… ZENG Qiyong SUN Baoyuan XU Jing, et al (206)
Deep sea microbial concentrated and isobaric sampling technique
……………………………………………………………… HUANG Zhonghua LIU Shaojun JIN Bo, et al (212)
Approach to feed-forward adaptive control for variable pump and valve controlled
electro-hydraulic system…………………………………………………… CHEN Baojiang MO Bo CAO Fan (217)
Central-fuel-rich swirl coal combustion technology in 1 025 t/h lean coal fired boiler
…………………………………………………………………… LI Zhengqi CHEN Zhichao SUN Rui, et al (221)
New variable displacement of double-action vane pump
……………………………………………………………… CHEN Lei SUN Yuqing ZHANG Yindong, et al (227)
Prototype warp deformation in the FDM process
………………………………………………………………………… WANG Tianming XI Juntong JIN Ye (233)
国家自然科学基金资助项目成果简介……………………………………………………………………… (63, 155)
Content of Chinese Journal of Mechanical Engineering indexed by Engineering Index (EI)
(Vol.41, No.8, 2005)…………………………………………………………………………………………………… (8)
|