Basic Theory

Comb filter array and its application…………………………………………………ZHU Limin  HE Enhua  DING Han (1)
Decision support technique for the implementation order of application 
systems for manufacturing enterprise …………………………DING Xianghai  TANG Renzhong  CHENG Yaodong  (6)
Study and profound analysis on general profile theory of scrolls

……………………………………………………………………………………  CHEN Jin  WANG Licun  LI Shiliu   (11)
Modified torsional model development and natural characteristics analysis of 
2K-H epicyclic gearing………………………………………………… SONG Yimin  XU Weidong  ZHANG Ce, et al (16)
Hopping gait kinematics for bionic kangaroo-hopping robot

……………………………………………………………………………… GE Wenjie  SHEN Yunwen  YANG Fang  (22)
Numerical study of unsteady flow in centrifugal pump with different type of impellers

………………………………………………………… GENG Shaojuan  NIE Chaoqun  HUANG Weiguang, et al (27)
Simulation and Micro-PIV research on classical microchannel flow

……………………………………………………………………………… XIE Haibo  FU Xin  YANG Huayong, et al (32)
Test investigation on hydraulic losses in discharge passage of axial-flow pump

………………………………………………………………………QIU Baoyun  HUANG Jiyan  YUAN Shouqi, et al (39)
Study of mechanism of activating flux increasing weld penetration of 
AC A-TIG welding for aluminum alloy……………………………………  HUANG Yong  FAN Ding  FAN Qinghua  (45)
New force system design used to performance test of tank gun control system

……………………………………………………………………………… HE Chi  ZHAO Keding  LI Shangyi, et al  (50)
Research on the method of cavitations resistance in piezoelectric pump with 
3-dimensional mesh structure……………………………………………… ZHANG Jianhui  KOU Jie  XIA Qixiao et al (55)
PIV measurements and numerical simulations of flow in centrifugal pump 
impellers with splitting vanes……………………………………… YUAN Shouqi  HE Youshi  YUAN Jianping, et al (60)
Distortion error model of the reference zero of laser auto-collimation 
angle measurement and its simulation……………………  ZHANG Guangjun  SHANG Hongyan  WEI Zhenzhong   (64)

Application of Engineering Technology

New method on parametric design of addendum binder surface and drawing 
process complementary for automotive panel rawing die…………………………………… CHEN Tao  LI Guangyao  (69)
Analysis of soluble organic fraction in particulate matter from a diesel engine by gas
chromatography-mass spectrometry……………………………………TAN Piqiang  HU Zhiyuan  LU Jiaxiang, et al (75)
Study on 3D elastoplastic contact problem of turbocharger compressor

………………………………………………………………………  LIAO Aihua  ZHANG Hongwu  WU Changhua  (81)
Immune evolution algorithm for deterministic job shop scheduling

…………………………………………………………………… NIU Ganggang  SUN Shudong  YU Jianjun, et al  (87)
Development of driving module for a solenoid-valve regulated fuel-metering system

………………………………………………………………………………… LI Jin  ZHANG Kexun  LI Jianqiu, et al (92)
Integrated task-assigning model of energy saving and noise reduction in the 
machining systems and its application………………………………………………… CAO Huajun  LIU Fei  HE Yan (97)
Computing dynamic coefficients of see-through labyrinth seal with two-control-volume model

………………………………………………………………… ZHAO Sanxing  MENG Guang  LENG Xiaolei, et al (103)
Closed-loop input shaper eliminating residual vibration of multi-mode flexible systems

………………………………………………………………  DONG Mingxiao  SUN Jie  ZHENG Kangping, et al  (110)
Principle and application of differential cylinder system controlled with displacement
pump, accumulator and proportional valve…………………………… QUAN Long  LI Fenglan  TIAN Huiqin, et at (115)
Behavior-based robot fuzzy motion planning approach in unknown environments

…………………………………………………………………………………FU Yili  JIN Bao  WANG Shuguo, et al (120)
Fault diagnosis technique of rotating machine based on CHMM

………………………………………………………………………… SONG Xueping  MA Hui  MAO Guohao, et al (126)
Sourcing configuration for product mass customization

…………………………………………………………………………… HOU Liang  HAN Donghui  LIN Zusheng (131)
Snake-like robot controller with cyclic inhibitory CPG model

…………………………………………………………………………………… LU Zhenli  MA Shugen  LI Bin, et al (137)
Improvement of ultrasonic peening treatment on tubular joints under high stress ratio loading

…………………………………………………………………… WANG Dongpo  CAO Junhui  HUO Lixing, et al  (144)
Diagnosability analysis of manufacturing systems for quality control

………………………………………………………………………………  DU Shichang  XI Lifeng  PAN Ershun  (149)
Frictional contact problems in sectional finite element analysis of sheet metal 
flexible-die forming process………………………………………………………… WANG Zhongjin  LIU Jianguang (155)
Mechanism of heat transfer enhancement of semi-ellipse vortex generator

……………………………………………………………………WANG Jiansheng  TANG Junjie  ZHANG Jinfeng (160)
Research on the leakage flow characteristics in the stepped labyrinth seal

…………………………………………………………………………………… LI Jun  LÜ Qiang  FENG Zhenping (165)
Scheme design and simulation result of internal combustion hydraulic system

………………………………………………………………ZHANG Tiezhu  DAI Zuoqiang  ZHANG Hongxin, et al (169)
Experimental study of nonlinear dynamic characteristics for three types of hydraulic engine
mounes and parameters identification method…………………………………………… FAN Ranglin   LÜ Zhenhua (174)
360º profile measurement using a novel image connection method

…………………………………………………………………………… ZHANG Xiaoling  LIN Yuchi  WU Bo, et al (182)
Reseach on dynamics of the platform used to simulate the tank engine’s movement state

……………………………………………………………………… YUAN Lipeng  XU Hongguang  ZHAO Keding (186)
Overlapping parameters of rapid prototyping based on 
pulsed micro-plasma arc welding……………………………WURIKAIXI Aiyiti  ZHAO Wanhua  LU Bingheng, et al (192)
Analysis on the microstructure of variable polarity plasma arc welding of magnesium alloy

……………………………………………………………………… LIU Liming  SHEN Yong  ZHANG Zhaodong  (198)
Nonlinear modelling and feedback linearization of vavle-controlled asymmetrical cylinder

…………………………………………………………………………… YANG Junhong  YIN Ziqiang  LI Shengyi  (203)
Research on influence of magnetic treatment on the distribution of welding 
residual stress of low carbon steel…………………………………… LIN Jian  HUANG Shiwei  CAI Zhipeng, et al (208)
Optimization on composition and properties of bainite-nodular iron composite rollers

……………………………………………………………………………… LIU Ying  YANG Chengzhao XI Anmin (214)
Application of bond graph theory in electrorheological fluid engine mount

…………………………………………………………………… XU Cangsu  HUANG Chengxiu  LI Guangming (219)
Correlation analysis of broken wire signal in wire rope testing

…………………………………………………………………………… CHEN Hougui  KANG Yihua  WU Xinjun (224)
Robust control of hybrid parallel-serial robot…………………………………………………… ZHOU Bing  XU Yan (229)

The content prediction of Chinese Journal of Mechanical Engineering (English Edition),

Vol.19, No.2, 2006………………………………………………………………………………………………………… (233)
Content of Chinese Journal of Mechanical Engineering  indexed by Engineering Index (EI) (Vol.41, No.10, 2005)…………(96)
Other……………………………………………………………………………………………………………… (44, 102, 223)