Overview

Progress of research on nanotribology…………………………………………………………………WEN Shizhu (1)

Basic Theory

Identification method of giant magnetostrictive transducer’s dynamic parameters and magnetic parameters 

…………………………………………………………………………JIA Zhenyuan WANG Xiaoyu WANG Fuji (9)
Impedance/admittance model of ultrasonic transducer system in thermosonic bonding
……………………………………………………………………………LONG Zhili WU Yunxin HAN Lei et al (14)
Flow boiling of liquid nitrogen in micro-tube—two-phase heat transfer analysis
……………………………………………………………… QI Shouliang ZHANG Peng WANG Ruzhu et al (20)
Unscented particle filter and log likelihood ratio based fault diagnosis of nonlinear system in non-Gaussian noises 
……………………………………………………………………GE Zhexue YANG Yongmin HU Zheng et al (27)
Relationship between arc sound and subsidence of weld bead in aluminum alloy MIG welding process 
………………………………………………………………………SHI Yu HUANG Jiankang FAN Ding et al  (32)
Experimental observation of elastohydrodynamic lubrication films under conditions of wall slippage 
…………………………………………………………………… GUO Feng WONG Pat Lam FU Zhongxue (36)
Behavior on drag reducing by coupling flexible tubes with turbulent flow
………………………………………………………………CAI Shupeng TANG Chuanlin ZHANG Fenghua (41)
Synthesis of four-bar approximate straight-line linkage with infinitely far instant center 
…………………………………………………………………… WANG Zhong ZHU Hongjun LIAO Lei et al (46)
Analysis of welding conditions in short-circuiting transition based on approximate entropy 
…………………………………………………………………………CAO Biao LÜ Xiaoqing ZENG Min et al (50)
Large eddy simulation on hert transfer enhancement of inclined-cut ellipsoidal vortex generator 
…………………………………………………………… WANG Jiansheng LIU Zhiyi ZHANG Jinfeng et al (55)
Numerical simulation of 3D viscous flow in tubular pumping station on dual-directional operation 
…………………………………………………………………………………………………LI Long WANG Ze  (62)
Analysis method of reliability sensitivity based on response surface methods
……………………………………………………………………………… YAN Ming SUN Zhili YANG Qiang (67)
Modeling and optimization of general constitutive equation of semi-solid thixoforming
……………………………………………………………………………… YU Xiaolu LI Fuguo LI Miaoquan  (72)
Nonlinear analysis methods of vehicle cornering stability
……………………………………………………………… SHI Shuming MAO Zhenyong XIANG Hui et al  ( 77)
Structure synthesis based on fault tolerant performance for redundant robots
………………………………………………………………………………………ZHAO Jing WEI Shanshan  ( 82)
Breakage characteristic of thermal-mechanical couple alternating fatigue for gasoline engine piston ring bank 
………………………………………………………………………………………………………ZHANG Wobo (89)
Influence factors of rolling force in tandem cold rolling
…………………………………………………………………ZHOU Fuqiang CAO Jianguo ZHANG Jie et al (94)

Application of Engineering Technology

Three steps chemical mechanical polishing technology of digital compact disc glass substrate
…………………………………………………………………………… LEI Hong LUO Jianbin LU Xinchun (98)
Method for crack tip recognition in an ultrasonic time of flight diffraction image
………………………………………………………………… CHI Dazhao GANG Tie SHENG Zhaoyang ( 103)
Measurement and evaluation of the surface topography of fine diamond grinding wheel
………………………………………………………………HUO Fengwei GUO Dongming JIN Zhuji et al ( 108)
Energy management strategy of parallel hybrid electric vehicle with continuously variable trasmission 
……………………………………………………………………… ZHANG Chenghui WU Jian CUI Naxin (114)
Configuration of reconfigurable modular planetary robots based on state configuration 
vector and state configuration matrix…………………………………WANG Minghui MA Shugen LI Bin et al (119)
Semi-empirical model for proton exchange membrane fuel cell
…………………………………………………………………XU Zhidan HUANG Haiyan BAO Cheng et al (126)
Underactuated robot dynamic modelling and control based on differential geometry
……………………………………………………………………………………… DENG Xiujuan LU Zhen  ( 132)
Residual life predictions for ball bearing based on neural networks
……………………………………………………………………XI Lifeng HUANG Runqing LI Xinglin et al  (137)
Blind source separation algorithm of signals about cyclostationary and its application 
…………………………………………………………………………………… SU Zhongyuan JIA Minping (144)
Establishment of physical simulation system based on network for plasticity processing
……………………………………………………………YU Dehong CHEN Youcai ZHAO Shengdun et al (150)
Magnetic-elastisity stability criterion of thin current plate simply suported at each edge
…………………………………………………………………WANG Zhiren BAI Xiangzhong BIAN Yuhong (155)
Fatigue behavior of AZ31B magnesium alloy joint with TIG-welding
…………………………………………………………………………WANG Wenxian MA Lili MU Wei et al  ( 161)
Experiment and numerical simulation of centrifugal pump with different wrap angle
………………………………………………………………… YANG Hua LIU Chao TANG Fangping et al (166)
Experimental study on filling imbalance in multi-cavity injection mold
……………………………………………………………CHEN Jingbo SHEN Changyu YOKOI Hidetoshi  (170)
Adaptive feedforward compensation method based on presliding-dynamic friction torque estimation model 
………………………………………………………………………XI Zhuyan LU Changhou PAN Wei et al  (175)
Optimization design of elastic structure in suspension of trailed forklift
…………………………………………………………………WANG Yong ZHAO Yongping DING Weiping (181)
Development of the mold-temperature-control solidification device with individual temperature control units 
………………………………………………………… YOU Dongdong SHAO Ming ZHOU Zhaoyao et al  (187)
Numerical simulation of fatigue life prediction of pressure vessel based on cyclic J-integral 
……………………………………………………………………………………… JIN Zhijiang HAN Shuxin (191)
Dynamic control of a free-floating flexible dual-arm space robotic system
…………………………………………………………………………WANG Congqing ZHANG Chenglong (196)
Creep rupture and enhancement mechanism of Cu particle enhancement composite solder joints 
…………………………………………………………………… YAN Yanfu FENG Lifang JI Lianqing et al (201)
Operational reliability of tractor engines based on non-homogeneous Poisson process
………………………………………………………………………AO Changlin LI Yijun YAN Xiangbin et al (206)
Genetic programming approach to predicting the temper embrittlement of rotor steels
………………………………………………………… ZHANG Shenghan FAN Yongzhe CHEN Yingmin  (211)
Aerodynamic and aeroacoustic study of collateral axial flow fan system inside outdoor unit of air-conditioner 
…………………………………………………………………… OUYANG Hua TIAN Jie WU Yadong et al (215)
Optimum computation for solving local structure force of the walking mobile chaissis
……………………………………………………………………… HAN Jun GAO Deping JIN Haibo et al ( 221)
Rotating machinery fault diagnosis combination of method based on genetic algorithm
……………………………………………………………LIU Zhansheng DOU Wei WANG Donghua et al (227)
Fluctuation of flow in high pressure vane within vane type pump
……………………………………………………………NA Yanqing WANG Zhengrong LI Shaonian et al (234)
Content of Chinese Journal of Mechanical Engineering  indexed by Engineering Index (EI)
(Vol.43, No.2, 2007)…………………………………………………………………………………………………  (8)