Basic Theory

Gear transmission with meshed medium belt
……………………………………………………………ZHANG Guanghui  LUO Wenjun  TAN Hua et al   (1)
Buckling analysis of serial chain composed of the right-angle-notch 
flexure hinges…………………………………………… ZONG Guanghua  YU Zhiwei  BI Shusheng et al  (8)
Kinematic design of 5-DOF hybrid robot with large workspace/limb-stroke ratio
………………………………………………………… LIU Haitao  HUANG Tian  CHETWYND D G et al  (14)
Fem simulation on the 3D temperature distribution of large area hot filament chemical 
vapor deposition system………………………………… XU Feng  ZUO Dunwen  LU Wenzhuang et al   (21)
Dry calibration technique of electromagnetic flowmeters……………… FU Xin  HU Liang  XIE Haibo et al  (26)
Numerical analysis method of complex tooth surface gear 
mesh contact region………………………………………… WU Xuemei  LI Guixian  ZHAO Weimin et al  (31)
Complete Jacobian matrix of a class of incompletely symmetrical parallel mechanisms with 4-DOF
…………………………………………………………… LI Yonggang  SONG Yimin  FENG Zhiyou et al (37)
Discrete anticipatory learning control of RAM velocity in injection molding machines
………………………………………………………………………………… CUI Cailian  SUN Mingxuan  (41)
Theory and methodology of generalized modular design
……………………………………………………… GAO Weiguo  XU Yanshen  CHEN Yongliang et al  (48)
Nonlinear hysteresis model and control of magnetostrictive micropositioner
……………………………………………………………………TANG Zhifeng  LÜ Fuzai  XIANG Zhanqin (55)
Empirical study on orderliness evaluation of production system 
based on structure entropy……………………………………………………ZHANG Zhifeng  XIAO Renbin (62)
Predicting of the collapsing for completely penetrated GTA weld pool
………………………………………………………………………ZHAO Ming  WU Chuansong  CHEN Ji (68)
Backdrivability design of robot mechanism
…………………………………………………………………… LUO Yangyu  CHEN Ken  ZHANG Yuru  (72)
Evaporation heat transfer characteristics and correlation for R410A-oil flow boiling in 7 mm 
C-shape horizontal smooth tube……………………… WANG Zhence  DING Guoliang  HU Haitao et al  (76)
Theoretical research on dynamic transmission accuracy for 2K-V-type drive
…………………………………………………………HAN Linshan  SHEN Yunwen  DONG Haijun et al (81)

Application of Engineering Technology
Produced three-dimensional metal parts by electron beam selective melting
……………………………………………………………………YAN Yongnian  QI Haibo  LIN Feng et al  (87)
Patterns of tacit knowledge based on graphic thinking in product design
………………………………………………………………LUO Shijian  PAN Yunhe  ZHU Shangshang  (93)
Method monitoring fixed liquid level of large tanks using lamb waves
…………………………………………………………………… HE Cunfu  HUAI Baoling  DU Ting et al  (99)
New method for rapid fabricating masters of PDMS-based microfluidic devices
………………………………………………………… XU Shujie  DUAN Yugang  DING Yucheng et al (105)
Adaptive control based on variant operating-point linearization in magnetic bearings of MSCMG
…………………………………………………………………………………WEI Tong  FANG Jiancheng (110)
Universal weight function method for mechanical and thermal loading and its application
……………………………………………………………………………………ZHOU Guobin  LU Yanlin  (116)
Crack preventing using electromagnetic heating and mechanical property in metal test 
piece with double space crack……………………………FU Yuming  ZHENG Lijuan  HE Dachuan et al (122)
Stress numerical simulation and thermal fatigue life prediction for SiCp_A356 composite 
material brake disc…………………………………………… WANG Wenjing  XIE Jilong  LI Qiang et al  (127)
Research and application of surface feature analysis for scatter data points
…………………………………………………………………SUN Dianzhu  FAN Zhixian  LI Yanrui et al (133)
Variations of hard disk substrate induced by nanoparticle impacts
………………………………………………………………………………………… XU Jin  LUO Jianbin (137)
Registration of pointcloud and CAD model based on extended Gaussian sphere
…………………………………………………………………ZHANG Xuechang  XI Juntong  YAN Junqi (142)
Acoustic emission characteristics of rub-impact for rotor-bearing system 
based on wavelet scalogram…………………………………………HE Yongyang  YIN Xinyun  CHU Fulei (149)
Integrated collaborative decision-making for product top-down design process
………………………………………………………………………………… LI Yuliang  PAN Shuangxia (154)
Prediction of friction squeal using finite element method
…………………………………………………………………… CHEN Guangxiong  ZHOU Zhongrong (164)
Processing of milling force signal and isolation of state information of milling machine 
based on singular value decomposition…………………… ZHAO Xuezhi  CHEN Tongjian  YE Bangyan  (169)
Optimal localization of free-form shaped parts in precision inspection
……………………………………………………………………… XU Jinting  SUN Yuwen  LIU Weijun (175)
Thermo-hydrodynamic lubrication analysis of internal combustion engine’s main bearing considering
thermal deformation effects………………………………TONG Baohong  GUI Changlin  SUN Jun et al (180)
3D surface mosaic technology based on single image
……………………………………………………………ZHU Jigui  WANG Dawei  REN  Tongqun et al (186)
Dynamical characteristics of exponential transformer in gear honing
………………………………………………………………………… WANG Shiying  LÜ Ming  YA Gang (190)
Voltage transfer characteristic of matrix converter
…………………………………………………… ZHANG Xiaoping  TANG Huaping  ZHU Jianlin et al (194)
Denoising method of block thresholding based on DT-CWT and its application 
in mechanical fault diagnosis……………………………………… CHEN Zhixin  XU Jinwu  YANG Debin (200)
Product cost estimation model in early design phase based on cost cluster
…………………………………………………………… JIANG Shaofei  LU Congda  LU Chunfu  et al (205)
Superposition throttle-slices opening size and characteristic test of telescope-damper
…………………………………………………………………………… ZHOU Changcheng   GU Liang (210)
Automatic working machine tools of wheel rims based on reconfiguration
……………………………………………………………………TIAN Bo  LIANG Xichang   PAN Jisheng (216)
Structure eigen vibration control of flywheel suspended by active magnetic bearings
………………………………………………………… ZHANG Kai  ZHANG Xiaozhang  ZHAO Lei et al (220)
Time frequency neighborhood adaptive de-noise method of ultrasonic inspection signals
………………………………………………………CHE Hongkun  XIANG Zhanqin  CHENG Yaodong  (226)
Finite element analysis of deformation and fracture of pure shear rubber specimen
……………………………………………………………………………… LI Xiaofang   YANG Xiaoxiang (232)

Content of Chinese Journal of Mechanical Engineering  indexed by Engineering Index (EI)
(Vol.42, No.10, 2006)……………………………………………………………………………………………(126)