Overview
Investigation into mechanism of initial rail corrugation formation at a curved track
…………………………………………………………………… JIN Xuesong WEN Zefeng XIAO Xinbiao (1)
New flexible coupled radial bogie with independently rotating wheels
…………………………………………………………………CHI Maoru ZHANG Weihua ZENG Jing et al (9)
The Influence Method on Axle Load to the Service Life of the Crossbar
Set of Railway Freight Car with Equivalent Load………………………………… REN Zunsong XIE Jilong (16)
Vehicle Lateral Stability Analysis Based on Wheel/Rail Match
………………………………………………………………PIAO Mingwei FAN Lingju LIANG Shulin et al (22)
Anti-Sliding Control Simulation of Railway Vehicle Braking
………………………………………………………………………………………… LUO Ren ZENG Jing (29)
Vibration model of wheel-rail at high frequency based on finite element
beam of sleeper……………………………………………………………………… ZHANG Yuan WEI Wei (35)
Fatigue test of the butt joints of 16MnR base material
………………………………………………………… WANG Jianbin WU Pingbo CHENG Xihong et al (39)
Wheel profile design based on rail profile expansion method
…………………………………………………………………ZHANG Jian WEN Zefeng SUN Liping et al (44)
Influence of High Speed Railway Wheels Ovalization on Vehicle Lateral Stability
……………………………………………………………… ZHANG xueshan XIAO xinbiao JIN xuesong (50)
Finite Element Analysis of Wheel/Rail Frictional Temperature during
Wheel Complete Slides on Rail………………………………………… WU Lei WEN Zefeng JIN Xuesong (57)
Effect of Rail Cant on the Rolling Contact Behavior of LM and LMA Wheelsets
………………………………………………………………………………LI Xia Wen Zefeng Jin Xuesong (64)
Basic Theory
Experimental Investigation on Condensation Heat Transfer of R22 and R410A in Microtubes
……………………………………………………………… ZHANG Huiyong LI Junming WANG Buxuan (70)
Research on corner contact and impact friction of gear drive
……………………………………………………… ZHOU Changjiang TANG Jinyuan ZHONG Zhihua (75)
Nonlinear dynamic study on unbalance-looseness coupling faults of rotor-ball
bearing-stator coupling system………………………………………………………………………Chen Guo (82)
Analyze on Stress and Strain Behavior of Spherical Vessel of Functionally
Graded Material Under Creep Condition…………… CHEN Jianjun TU Shandong XUAN Fuzhen et al (89)
Action Mechanism of Phase Transformation on Cavitation Erosion Resistance for Ferrous Alloy
……………………………………………………………………………………WANG Zaiyou ZHU Jinhua (94)
Euolvement Rule of Running-in Attractor
…………………………………………………………………………ZHU Hua GE Shirong LÜ Liang et al (99)
Dynamic analysis and simulation study on the vibration mill
………………………………………………………………………… XU Bo WANG Shulin LI Shengjuan (105)
Dynamical Modling and Computation on Electromechanical Coupling System of Grain
Reshaping Machine Tool for Solid Propellant Rocket Motor
………………………………………………………………… WU Jianxin LI Qiang ZHAO Weiguo et al (110)
Application of Engineering Technology
Rapid modeling of free form reflector surface based on iterative minor adjustment
……………………………………………………………………… WANG Gang SHAN Yan WU Weiwei (117)
Kinematics Transformation for Tilt Generated Method and Simulation
…………………………………………………………………ZHANG Wei WANG Taiyong LUO Jun et al (123)
Vibration Control of Cylindrical Shell Partially Treated With Active Laminated
Polyving lidene Fluoride Constrained Layer Damping
………………………………………………………ZHANG Yahong NIU Hongpan ZHANG Xinong et al (130)
Fundamental wave detection based on wavelet transform and empirical mode
decomposition with application in mechanical system
………………………………………………………………………… QIN Yi QIN Shuren MAO Yongfang (135)
Active vibration control for flexible smart structure based on acceleration feedback
………………………………………………………………………………………………… QIU Zhicheng (143)
Effect of Flexible Rotor on Performance of Traveling Wave Type Ultrasonic Motor
…………………………………………………………………………… CHEN Chao ZHAO Chunsheng (152)
Numerical simulaton of 3d turbulent flow in underwater pump
………………………………………………………………………YANG Minguan LI Hui LIU Dong et al (160)
Evolutionary static topology optimization of cyclic-symmetry structures
……………………………………………………………GAO Tong ZHANG Weihong ZHU Jihong et al (166)
Wear behavior of die steel with non-smooth surface in different shape and distance
……………………………………………………………………… CHEN Li ZHOU Hong ZHAO Yu et al (173)
Wavelet function suitable for fault feature extraction of acoustic emission signal
……………………………………………………………………… LI Xuejun LIAO Chuanjun CHU Fulei (177)
Simulation Method of Space Operation on The Ground——Buoyancy Method
………………………………………………………………………………………YAO Yansheng MEI Tao (182)
Error sensing design method for active structural acoustic control based on
acoustic radiation modes………………………………………………………………WU Jinwu JIANG Zhe (189)
Length-Traceable Nanometrological Dynamic Mode Afm With Sub-Nano Accuracy
………………………………………………………HUANG Qiangxian GONDA Satoshi MISUMI Ichiko (195)
System identification of the bullet-fuze system transfer function
………………………………………………………………………WANG Yabin LIU Mingjie TAN Huimin (200)
Tool path generation algorithm for five-axis nc machining with a toroidal cutter
……………………………………………………… CHEN Liangji CHENG Junwei WANG Yongzhang (205)
Load expression and structural optimization of compressed rubbish vehicle
……………………………………………………………CHEN Shuxun WANG Sunuan BAI Bin et al (213)
Improved Genetic Algorithm Based on Family Tree Used for the Material Selection
Optimization of Components Made of Multiphase Materials………………………………ZHANG Xiujuan (220)
Omni-directional mobile robot for floor cleaning
………………………………………………………………GAO Xueshan XU Dianguo WANG Yan et al (228)
Influence on Gear Mesh Noise From Different Tooth Profile Errors of Involute Gears
…………………………………………………………………LI Kailing SUN Naikun CUI Jianping et al (234)
Differential Shear Theory and Mathematical Model of High Pressure Double Roll Crush
………………………………………………………………………………………………… GAN Jianguo (241)
The content prediction of Chinese Journal of Mechanical Engineering (English Edition)
Vol.21, No.2, 2008……………………………………………………………………………………………… (235)
Content of Chinese Journal of Mechanical Engineering indexed by Engineering Index (EI)
Vol.43, No.7, 2007……………………………………………………………………………………………… (封三)
|