Basic Theory
Method of conceptual design of mechanic product driven by generalized performance
………………………………………………………………………… WEI Zhe TAN Jianrong FENG Yixiong  (1)
Design method for a kind of simple measurement scheme for calibration of
translational parallel mechanisms……………………………………CHANG Peng LI Tiemin LIU Xinjun et al  (11)
3D Models of thermo-mechanical coupling of grinding tooth and numerical analysis
………………………………………………………………MING Xingzu YAN Hongzhi CHEN Shuhan et al (17)
Characteristics of the gas journal bearing in micro-rotor systems
……………………………………………………………………ZHANG Wenming MENG Guang CHEN Di  (25)
Analysis of plastic wrinkling behavior in tube hydroforming process
…………………………………………………………………………TANG Zejun HE Zhubin YUAN Shijian  (34)
Method of meshing force analysis for the movable rolling teeth transmission
with cam actuating…………………………………………………………………… LI Jianfeng DONG Xinrui (39)
Reliability analysis on structral systems with load dependency
…………………………………………………………………………ZHOU Jinyu XIE Liyang QIAN Wenxue  (45)
Modeling of a giant magnetostrictive device for magnetic force control based on inverse 
magnetostrictive effect ……………………………………………ZHENG Jiaju WANG Hongli CAO Shuying  (51)
Fracture behavior of a brittle coating on a strained ductile substrate
…………………………………………………………YANG Banquan CHEN Guangnan ZHANG Kun et al (57)
Decomposition and synthesis of new type 2PPPPS-R-2PPPPS serial-parallel manipulator
……………………………………………………………………… LUO Jianguo HE Maoyan LU Zhen et al (62)

Application of Engineering Technology

Rescheduling algorithm based on rolling horizon decomposition for a dynamic 
job shop with uncertain arriving time…………………………………………… LIU Lin GU Hanyu XI Yugeng (68)
Self-adaptive filtering based state of charge estimation method for electric 
vehicle batteries…………………………………………… WANG Junping CAO Binggang CHEN Quanshi (76)
Hardware-in-the-loop simulation on dynamical coordinated control method in parallel 
hybrid electric vehicle (PHEV)…………………………………LUO Yugong YANG Diange LI Menghai et al  (80)
Safety analysis of complex system based on small world topological model
…………………………………………………………………………… LI Guo GAO Jianmin GAO Zhiyong  (86)
Reconfigurable mobile robot based on serial and parallel mechanism
…………………………………………………………WANG Wei ZHANG Houxiang DENG Zhicheng et al (92)
Controller area network protocol for powertrain system of electric vehicles
……………………………………………………………………LI Fang ZHANG Junzhi WANG Lifang et al (102)
Metal workability analysis in hot deformation by combination three-dimensional
processing maps including strain with finite element simulation
………………………………………………………………………… LIU Juan CUI Zhenshan LI Congxin (108)
Anodic Bonding Mechanism of ZrO2 Electrolyte Ceramics and Al
………………………………………………………………LIU Cuirong MENG Qingsen LU Xiaoying et al (114)
Principle of asymmetric crank mechanism of new-type rolling shear
………………………………………………………………… HUANG Qingxue MA Lifeng LI Jinbao et al  (119)
Change rule of chip breaking limits in high speed machining
…………………………………………………………………ZHANG Huiping LI Zhenjia LIU Erliang et al  (124)
Parametric model and performance simulation on the screw conveyor of variable diameters
and variabl pitches………………………………………………QIU Aihong GONG Shuguang XIE Guilan et al  (131)
Key technology on stereo image mosaic of shape measurement
…………………………………………………………………… REN Tongqun ZHU Jigui LI Yanjun et al  (137)
Application and performance analysis of dynamic-planning-based flexible time triggered 
controller area network…………………………………CAO Wanke ZHANG Tianxia WEN Bangchun et al (142)
Analysis on flexible and rigid blank-holders technology applying on thin sheet metal in
multi-point forming…………………………………………… SUN Gang LI Mingzhe DENG Yushan et al  (147)
3D parameterized shape optimization design for machine tool mechanism
……………………………………………………………………DAI Lei GUAN Zhenqun SHAN Julin et al   (152)
Hermetic swing expander in transcritical carbon dioxide cycle water source
heat pump………………………………………………………………LI Minxia MA Yitai AN Qingsong et al  (160)
Flexural vibration analysis for symmetric honeycomb panels of simple support
boundary conditions……………………………………………LI Yongqiang JIN Zhiqiang WANG Wei et al (165)
Benefit analysis of closed-loop supply chain under remanufacturing condition
………………………………………………………………………………………………LI Xinjun DA Qingli  (170)
Numerical simulation of the mechanism for penetration increasing of a-tig welding
………………………………………………………………………ZHANG Ruihua YIN Yan FAN Ding et al (175)
Pressed protuberant characters recognition based on the reconstruction errors and specific subspace
…………………………………………………………………………LI Xueyong LU Changhou LI Jianmei (181)
Analysis of metal flow and technology improvement on gear forging
………………………………………………………………HU Chengliang LIU Quankun LIU Yongxi et al (186)
Extraction of instantaneous characteristics of nonstationary signal using harmonic
wavelet transforms……………………………………………………………………………… ZHU Hongjun  (191)
Controlling model for cycloid rotational indexing machining
………………………………………………………………………………LI Jia HE Jianghua LI Guanghui  (196)
Crushing product size-reducton analysis of compressing crusher
…………………………………………………………HUANG Dongming FAN Xiumin WU Dianliang et al(201)
Triangular mesh segmentation based geometry image
……………………………………………………………………………………LI Qimin KE Yinglin HE Yulin(208)
Formability principles of linear-weld-line tailor-weld blanks (TWBs) with different 
thickness ratios……………………………………………TONG Zhengguo LIN Jianping TIAN Haobin et al  (215)
Downhole sound radiator for enhancing oil recovery
………………………………………………………………………XU Aiqun XIANG Zhanqin CHEN Zichen (220)
Mechanism of springback influence on stiffness of automotive cylindrical shallow panels
…………………………………………………………………XING Zhongwen ZHAO Lihong YANG Yuying(226)
Low-frequency resonance of mold driven by oval gears
……………………………………………………………………… LI Xiankui YANG Hongpu YANG Ladao (231)
Simulation and experiment of multi-body systern dynamic model with clearance joint for 
ammunition belt system………………………………………………………WANG Guangjian JIANG Tieniu (238)
Longitudinal-torsional vibration converter of cylinder with multiple diagonally slits
………………………………………………………………………………………………………………PI Jun (242)
The content prediction of Chinese Journal of Mechanical Engineering (English Edition)
Vol.21, No.3, 2008………………………………………………………………………………………………… (249)

Content of Chinese Journal of Mechanical Engineering  indexed by Engineering Index (EI)

Vol.43, No.9, 2007………………………………………………………………………………………………(cover 3)
Others…………………………………………………………………………………………………………………(33)