Chinese Journal of Mechanical Engineering

Honors of Chinese Journal of Mechanical Engineering
(English Edition)

2001: Chinese Journal Square-Matrix Journal
March 1997: Third-class prize of second-session National Excellent Scientific and Technology Journals of China
1990: Third-class prize of National Journal Exhibition Overall Design of China

Feb. 2006: Outstanding Paper Recommendation Prize of third-session Excellent Scientific and Technology Journals sponsored China Association for Science and Technology

Apr. 1997: Second-class prize Excellent Scientific and Technology Journals sponsored by China Association for Science and Technology

Sep. 1992: First-class prize of first-session Excellent Scientific and Technology Journals sponsored by China Association for Science and Technology

June 1999: Third-class prize of Excellent Mechanical Industry Journals during 1996-1998 sponsored by National Mechanical Industry Ministry of China
Aug. 1995: Second-class prize of Excellent Scientific and Technology Journals during 1993-1994 sponsored by National Mechanical Industry Ministry of China

Sep. 1996: Chinese Mechanical Engineering Society Achievement Prize of Journal Release Abroad

Dec. 1992: Prize of Full Excellent Jounal

Excellent academic papers of CJME (English Edition) selected
by China Association for Science and Technology

Paper title	Issue	Authors	Prize class
Adaptive state feedback controller with kalman filter observe for machining process	No.3, 1999	Liu Qiang Yusuf Altintas Wang Huiwen	1 st, 2003
Research of guidance technology for assembly modeling in virtual environment	No.2, 2001	Zhang Shuyou Liu Zhenyu Tan Jianrong	2 nd, 2004
Study on Macro & Micro Modeling on Solidification Process of Shaped Casting	No.3, 2002	Liu Baicheng Kang Jinwu Zhao Haidong	3 rd, 2006
Analysis of roll system stability about aluminum foil mills	No.2, 2003	Shu Xuedao Shen Guangxian	3 rd, 2006

Prize of projects related to papers of CJME (English Edition)
(not exactly)

No.	Authors	Unit of 1st author	Paper title	Issue	Project prize
1	Shu Xuedao,et al	Beiman Special Type Steel Stock Corporation Ltd	APPLICATION OF SUB-ELEMENT AND MICRO-ELEMENT IN BEM ABOUT MILL ROLLER BEARING LOAD	2004,17(3):423-426	Second-class prize of National Sci & Tec Development; First-class prize of National Sci & Tec Development of Mechanical Industry , et al
1	Shu Xuedao,et al	Beiman Special Type Steel Stock Corporation Ltd	ANALYSIS OF ROLL SYSTEM STABILITY ABOUT ALUMINUM FOIL MILlLS	2003,16(2):181-183,189
2	Fu Xin,et al	Zhejiang University	INVESTIGATION OF VORTEX SHEDDING INDUCED HYDRODYNAMIC VIBRATION IN VORTEX STREET FLOWMETER	2001,14(4):310-313	Second-class prize of National Sci & Tec Development; First-class prize of Zhejiang Provincial Sci & Tec Development , et al
2	Fu Xin,et al	Zhejiang University	SIMULATION OF FLUID FLOW IN CHANNEL OF A NOVEL HYDRAULIC SHOCK GENERATOR	2000,13(4):258-262
3	Zhu Zuchao,et al	Zhejiang University	EXPERIMENTAL STUDY ON HIGH-SPEED CENTRIFUGAL PUMPS WITH DIFFERENT IMPELLERS	2002,15(4):372-375	Second-class prize of Zhejiang Provincial Sci & Tec Development
4	Zhang Shuyou,et al	Zhejiang University	RESEARCH OF GUIDANCE TECHNOLOGY FOR ASSEMBLY MODELING IN VIRTUAL ENVIRONMENT	2001,14(2):139-143,150	Zhejiang Provincial Sci & Tec Development
5	Wang Xuanyin,et al	Zhejiang University	DISTANCE MEASURING MODELING AND ERROR ANALYSIS OF DUAL-CCD VISION SYSTEM SIMULATING HUMAN EYES AND NECK	2003,16(4):396-399	Second-class prize of Zhejiang Provincial Sci & Tec Development , et al
5	Wang Xuanyin,et al	Zhejiang University	RESEARCH ON EXPERT SYSTEM OF FAULT DETECTION AND DIAGNOSING FOR PNEUMATIC SYSTEM OF AUTOMATIC PRODUCTION LINE	2002,15(2):136-141
6	Wen Shizhu,et al	Tsinghua University	EXPERIMENTAL STUDY ON THE LOAD DECAY AND ITS EFFECT ON LEAK RATE OF O-RING	2003,16(1):46-49	Second-class prize of National Natural Science; First-class prize of Tianjin Municipal Natural Science
6	Wen Shizhu,et al	Tsinghua University	MECHANICAL DEFLECTION OF POLYSILICON MICROCANTILEVER BEAMS USING NANOINDENTATION	2003,16(4):251-257
7	Wu Licheng	Tsinghua University	COMPLEX NUMBER MODE APPROACH FOR REDUCING VIBRATION OF STRUCTURAL FLEXIBLE REDUNDANT ROBOT MANIPULATORS	2001,14(2):102-105	Second-class prize of National Ministry of Education Sci & Tec Development
8	Qin Shuren,et al	Chongqing University	INTELLIGENT VIRTUAL CONTROL:MEASURING INSTRUMENT FROM WHOLE TO PART	2002,15(2):131-135	Second-class prize of National Sci & Tec Development; First-class prize of National Ministry of Education Sci & Tec Development
8	Qin Shuren,et al	Chongqing University	RESEARCH OF WAVELET TRANSFORM INSTRUMENT SYSTEM FOR SIGNAL ANALYSIS	2000,13(2):114-121
9	Yi Shuping ,et al	Chongqing University	STUDY ON JOINING PROCESS FOR LAMINATED OBJECT MANUFACTURING USING METAL AS MODELING MATERIALS	2003,16(1):4-6	First-class prize of National High School Sci & Tec Development
10	Liu Fei,et al	Chongqing University	NOISE REDUCTION SCHEDULING METHOD IN A SHOP FLOOR AND ITS CASE STUDY	2003,16(4):337-339	Second-class prize of National Ministry of Education Sci & Tec Development; First-class prize of National High School Sci & Tec Development2项
11	Huang Qingxue,et al	Taiyuan Heavy Mahcinery Institute	SELF-ALIGNING EVEN LOAD MECHANISM OF MULTI-ROW BEARINGS OF LARGE STRIP ROLLING MILL	2006,19(2):246-250	First-class prize of Shanxi (山西) Provincial Sci & Tec Development; First-class prize of National Ministry of Education Sci & Tec Development, et al
12	Shu Xuedao,et al	Yanshan University	CALCULATION OF MILL RIGIDITY BY THREE DIMENSION CONTACT BOUNDARY ELEMENT METHOD	2001,14(1):82-85
13	Liu Zhubai,et al	Yanshan University	RIGID-PLASTIC MECHANICAL MODEL FOR THE FORGING METHOD WITH HORIZONTAL V-SHAPED ANVIL	2006,19(2):272-281	First-class prize of National Ministry of Education Sci & Tec Development; First-class prize of Hebei Provincial Sci & Tec Development
14	Hu Yanping	Wuhan University of Technology	DESIGN THEORY FOR G-Π BRIDGE RELIEF VALVE WITH ZERO OVERRIDE	2004,17(3):463-465	First-class prize of Hunan Provincial Sci & Tec Development , et al
15	Li Zhenjia,et al	Harbin University of Science & Technology	FORECAST OF BREAKING LENGTH OF SIDE CURLING SHORT-SPIRAL CHIPS	1999,12(4):297-302	Second-class prize of Heilongjiang Provincial Sci & Tec Development
16	Zhu Yifeng,et al	Department of Mechatronics Engineering	STUDY ON THE PRESSURE IN PLASMA ARC	2003,16(1):34-36	First-class prize of National Aviation Ministry Sci & Tec Development; Second-class prize of National Defense Sci & Tec Development
17	Chen Xuedong,et al	Hefei general Machinery Research Institute	FAILURE ANALYSIS AND INSPECTION OF CRACKING OF IN-SERVICE CATALYTIC REGENERATOR	2002,15(2):167-172	First-class prize of Anhui Provincial Sci & Tec Development; First-class prize of National Mechanical Sci & Tec, et al
18	Liu Yinshui,et al	Huazhong University of Science and Technology	EXPERIMENTAL STUDY OF EFFECTS OF OPERATING CONDITIONS ON THE FLOW CHARACTERISTICS OF WATER HYDRAULITC THROTTLE	2004,17(3):450-453	Second-class prize of National Defense Sci & Tec Development , et al
19	Qiu Baoyun,et al	Yangzhou University	STUDY ON POWER SPACE COEFFICIENT OF ELECTRICAL MOTOR IN LARGE PUMP STATION BASED ON RELIABILITY	2004,17(4):498-501	Second-class prize of Jiangsu Provincial Sci & Tec Development , et al
20	Wang Xiaoping ,et al	Nanjing University of Aeronautics and Astronautics	PERIODIC DEFORMATION OF PARAMETRIC SURFACE	2004,17(3):394-398	Second-class prize of Jiangsu Provincial Sci & Tec Development , et al
21	Quan Long,et al	Taiyuan University of Technology	RESEARCH ON THE PERFORMANCE OF NEW TYPE OF PROPORTIONAL PESSURE AND FLOW CONTROL VALVE	2003,16(3):281-284	Second-class prize of Shanxi(山西) Provincial Sci & Tec Development
22	Song Kongjie,et al	Shandong Polytechnic University	POWER FLOW TRANSMISSION OF AN ASYMMETRICAL FLEXIBLE SYSTEM EXCITED BY AN OFF-CENTRE FORCE	1999,12(3):183-187	Second-class prize of Shandong Provincial Sci & Tec Development
23	Wang Taiyong,et al	Tianjin University	RESEARCH ON MULTI-FUNCTION INTELLIGENT IDENTIFICATION AND MONITORING SYSTEM	1997,10(3):236-240	Second-class prize of Tianjin Municipal Natural Science

Benefit of projects related to papers of CJME (English Edition) (not exactly)

No.	Authors	Unit of 1st author	Paper title	Issue	Project benefit
No.	Authors	Unit of 1st author	Paper title	Issue	Application	Benefit
1	Chen Xuedong,et al	Hefei general Machinery Research Institute	FAILURE ANALYSIS AND INSPECTION OF CRACKING OF IN-SERVICE CATALYTIC REGENERATOR	2002,15(2):167-172	中国石化总公司中国石油天然气总公司所属20余家大型石化企业	直接经济效益:2亿元间接效益:3亿元
2	Han Yingchun	Jilin University	NEW TECHNOLOGY AND MACHINE TOOL FOR THE FORMING OF THE REAR AXLE SHAFT OF LIGHT TRUCK	2004,17(4): 528-530	中国第一汽车集团公司	直接经济效益:3千万元间接经济效益:15千万元
3	Shu Xuedao,et al	University of Science and Technology Beijing	APPLICATION OF SUB-ELEMENT AND MICRO-ELEMENT IN BEM ABOUT MILL ROLLER BEARING LOAD	2004,17(3):423-426	宝山钢铁股份有限公司河北新兴铸管股份有限公司	直接经济效益:2 600万元间接经济效益:2 760万元
3	Shu Xuedao,et al	University of Science and Technology Beijing	ANALYSIS OF ROLL SYSTEM STABILITY ABOUT ALUMINUM FOIL MILLS	2003,16(2):181-183,189	宝山钢铁股份有限公司河北新兴铸管股份有限公司	直接经济效益:2 600万元间接经济效益:2 760万元
4	Wang Xuanyin ,et al	Zhejiang University	DISTANCE MEASURING MODELING AND ERROR ANALYSIS OF DUAL-CCD VISION SYSTEM SIMULATING HUMAN EYES AND NECK	2003,16(4):396-399	军工部门和企业	直接经济效益:2千万元
4	Wang Xuanyin ,et al	Zhejiang University	RESEARCH ON EXPERT SYSTEM OF FAULT DETECTION AND DIAGNOSING FOR PNEUMATIC SYSTEM OF AUTOMATIC PRODUCTION LINE	2002,15(2):136-141	军工部门和企业	直接经济效益:2千万元
5	Xu Yanshen,et al	Tianjin University	RESEARCH ON THE GENERALIZED MODULAR DESIGN METHOD WITH FLEXIBLE MODULES OF PRODUCT STRUCTURES	2004,17(4):477-480	天津市锻压机总厂	直接经济效益:900万元间接经济效益:4 900>万元
6	Li Yongtang ,et al	Taiyuan Heavy Machinery Institure	RESEARCH OF THE DYNAMIC CHARACTERISTICS ON A NEW HYDRAULIC SYSTEM OF ELECTRO-HYDRAULIC	2001,14(2): 171-174	太原机车车辆厂	直接经济效益:870万元间接经济效益:3 200万元
7	Ruan Jian,et al	Zhejiang University of Technology	2D DIGITAL SIMPLIFIED FLOW VALVE	2004,17(2): 311-314	电液材料试验机高精度加载系统	直接经济效益:800万元间接经济效益:2 700万元
7	Ruan Jian,et al	Zhejiang University of Technology	2D SIMPLIFIED SERVO VALVE	2003,16(2): 132-135	电液材料试验机高精度加载系统	直接经济效益:800万元间接经济效益:2 700万元
8	Zhang Kai,et al	School of Mechanical Engineering	Study on singular configurations and computer simulation of 6R robot	2004,17(2): 177-180	南京汽车工业公司	直接经济效益:550万元
9	Qin Shuren ,et al	Chongqing University	INTELLIGENT VIRTUAL CONTROL INSTRUMENT FROM WHOLE TO PART	2002,15(2):131-135	西南工业大学	直接经济效益:380万元间接经济效益:870万元
9	Qin Shuren ,et al	Chongqing University	RESEARCH OF WAVELET TRANSFORM INSTRUMENT SYSTEM FOR SIGNAL ANALYSIS	2000,13(2):114-121	西南工业大学	直接经济效益:380万元间接经济效益:870万元
10	Shen Gangxian,et al	Yanshan University	CALCULATION OF MILL RIGIDITY BY THREE DIMENSION CONTACT BEM	2001,4(1): 32-35	新兴铸管股份有限公司	经济效益:1 260万元
11	Qiu Baoyun	Water Conservancy College, Yangzhou University	STUDY ON POWER SPACE COEFFICIENT OF ELECTRICAL MOTOR IN LARGE PUMP STATION BASED ON RELIABILITY	2004,17(4):498-501	南水北调东线一期工程阶梯泵站	直接经济效益:300万元间接经济效益:800万元
12	Fu Xin,et al	Zhejiang University	INVESTIGATION OF VORTEX SHEDDING INDUCED HYDRODYNAMIC VIBRATION IN VORTEX STREET FLOWMETER	2001,14(4):310-313	浙江天信仪表有限公司	实现销售额:1亿元
12	Fu Xin,et al	Zhejiang University	SIMULATION OF FLUID FLOW IN CHANNEL OF A NOVEL HYDRAULIC SHOCK GENERATOR	2000,13(4):258-262	浙江天信仪表有限公司	实现销售额:1亿元
13	Zhang Shuyou,et al	Zhejiang University	RESEARCH OF GUIDANCE TECHNOLOGY FOR ASSEMBLY MODELING IN VIRTUAL ENVIRONMENT	2001,14(2):139-143,150	杭州发动机厂	减少产品样机试制成本与试制周期,大大提高发动机产品的设计效率
14	Song Wenwu,et al	Sichuan Institute of Technology	RESEARCH AND DESIGN OF THE STRAFLO-FRANCLS TURBINE	2000,13(3): 219-223	国家重点工程—川东盐厂真空制盐30万吨主循环用泵	节约设备投资:100万元年节约开支:40万元
15	Liu Huran ,et al	Department of Mechanical Engineering	CONTACT DEFORMATION AND PRE-CONTROL OF TRANSMISSION PROPERTIES OF POINT CONJUGATE GEAR	2000,13(1): 76-80	准双曲面齿轮接能道预控和数控	直接和间接经济效益共1亿元
16	Cao Huajun,et al	Chongqing University	NOISE REDUCTION SCHEDULING METHOD IN A SHOP FLOOR AND ITS CASE STUDY	2003,16(4): 337-339	重庆机床厂	缩短生产周期,节约能源,减少切削液污染,取得显著经济效益,销售合同额3千多万元
17	Zhao Yanwei,et al	Zhejiang Universtiy of Technology	RHOMBUS THINKING METHOD AND ITS APPLICATION IN SCHEME DESIGN	2001,14(2): 156-159	杭州机床集团有限公司	大大缩短产品设计及评估周期,显著提高新产品竞争力

Excellent papers of 50th anniversary of publication of
CJME (English Edition)(15)

Paper title	Author	Unit of 1st author	Issue
FORCED REGENERATIVE CHATTER AND ITS CONTROL STRATEGIES IN MACHINE TOOLS	Wu Ya Ke Shiqiu Yang Shuzi Li Weiguo Xu Shanxiang Jiang Qiang	Huazhong University of Science and Technology	1992,5(1)
SIMULATION OF AN UNEVEN ROAD SURFACE AND VEHICLE VIBRATION BASED ON THE FILTERED POISSON PROCESS	Zhang Xiangwei	Chongqing University	1993,6(3)
MULTI-STAGE ADAPTIVE CONTROL FOR THE ELECTROHYDRAULIC SERVO SYSTEM	Li Hongren Han Junwei Nie Boxun Chen Gang	Harbin Institute of Technology	1993,6(4)
FUZZY DESIGN SYSTEM OF CAM MECHANISMS	Zhao Han Zou Huijun	Hefei University of Technology	1994,7(2)
DYNAMIC MODELING FOR ROLLING SLIDEWAYS ASSEMBLY WITH DAMPING OIL-FILMS	Wang Qiyi Jiang Zao Qian Weimin	Northeastern University	1994,7(4)
STUDY ON CONTROLLABIBITY AND OBSERVABILITY FOR THIN PLATE SYSTEM WITH PARAMETER UNCERTAINTY	Li Yiyang Ren Lihong Chen Guodong Liang Tianpei	Department of Mechanical Engineering, The Hong Kong Polytechnic University	1998,11(3)
INFLUENCE OF THREAD PITCH ON LOAD DISTRIBUTION ON THREADED END OF CYLINDER	Mitsuo Kobayashi Kaoru Hongo Michihiko Tanaka	Kogakuin University	1998,11(4)
IMPROVING CUTTING TOOL RELIABILITY BY PROOF TEST	Li Zhaoqian Yang Junru	Shandong University of Technology	1999,12(3)
ADPTIVE STATE FEEDBACK CONTROLLER WITH KALMAN FILTER OBSERVER FOR MACHINING PROCESS	Liu Qiang Yusuf Altintas Wang Huiwen	Beijing University of Aeronautics and Astronautics	1999,12(3)
REGIONAL NETWORKED MANUFACTURING SYSTEM	Liu Fei Yin Chao Liu Sheng	Chongqing University	2000,13(Supp)
INVESTIGATION OF VORTEX SHEDDING INDUCED HYDRODYNAMIC VIBRATION IN VORTEX STREET FLOWMETER	Fu Xin Xu Bing Yang Huayong	State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University	2001,14(4)
RESEARCH ON THE ON-LINE MEASURING SYSTEM FOR THE MIDDLE-CONVEX AND VARYING ELLIPSE PISTON SKIRT	Wang Xiankui Jiang Simin Qian Lei Shi Zhongdong Wu Dan	Tsinghua University	2001,14(4)
FAILURE ANALYSIS AND INSPECTION OF CRACKING OF IN-SERVICE CATALYTIC REGENERATOR	Chen Xuedong Guan Weihe Chen Wenhu Yao Zuoquan Gu Xuedong Wang Zhaowei	Hefei general Machinery Research Institute	2002,15(2)
STUDY ON MACRO AND MICRO MODELING ON SOLIDIFICATION PROCESS OF SHAPED CASTING	Liu Baicheng Kang Jinwu Zhao Haidong	Tsinghua University	2002,15(3)
KINEMATIC DESIGN OF A RECONFIGURABLE MINIATURE PARALLEL KINEMATIC MACHINE	Huang Tian Li Meng Zhao Xingyu D J Whitehouse	School of Mechanical Engineering, Tianjin University	2003,16(1)

Expert Testimonials about Chinese Journal of Mechanical Engineering

　　The founding of Chinese Journal of Mechanical Engineering (CJME) sponsored by Chinese Mechanical Engineering Society has been for half a century. I was her faithful reader early in my college days. Afterwards, I wrote articles for her and became an author. In the 1990s, I was happy to become a member of her editorial advisory board and participate in the examining of manuscripts. Over 40-odd years, I have witnessed her steps of development. Over the past 50 years, she has consistently adhered to faithfully reflecting the academic achievements in the Chinese academic circles of mechanical engineering, reflecting the frontier development in the mechanical engineering science, and reflecting the major achievements in the development of Chinese machinery industry. She adheres to such a style of study and writing, i.e. preciseness, seriousness, truthful-ness, realism, and integration of theory with practice, thereby she has formed her own unique style and tradition, not only won high prestige in the academic circles of Chinese mechanical engineering, but also earned extensive praise in the circles of international engineering academic journals. She is worthy of becoming one of the most excellent engineering academic journals. The achievements of CJME in the 50 years development are really worthy of congratulation.

—— Lu Yongxiang
Vice chairman of the National People's Congress, president of Chinese Academy of Sciences, President of Chinese Mechanical Engineering Society, expert in fluid power transmission and control, honorary chairman of the 8th editorial advisory board of CJME.

　　Chinese Journal of Mechanical Engineering escapes not only from being mediocre and tedious, but also from being obscure and vacuous, while making effort to present meaty and useful content with simple and fluid language. …in spite of the many difficulties come across in decades of development, its quality has never been through any valley.

—— Lei Tianjue
Academician of Chinese Academy of Sciences

　　Chinese Journal of Mechanical Engineering is China’s most authoritative academic journal in the field of mechanical engineering, and is one of the earliest founded professional journals in China. Through decades of storms, it has always published with adherence to the principle that science and technology are the primary productive force, and has played an important role in exchanging and promoting basic mechanical theories and application of research findings.

—— Zhang Qixian
Academician of Chinese Academy of Engineering, Professor of Beihang University

Chinese Journal of Mechanical Engineering (English Edition) has pooled the latest theories and excellent research findings of China’s mechanical industry, while playing an active role in promoting international academic exchanges as well as for China's academic research in this field to go across the border and to be recognized by the world.

—— Yang Shuzi
Academician of Chinese Academy of Sciences, former President of Huazhong University of Technology

　　I am a loyal reader of Chinese Journal of Mechanical Engineering and one of those who have gained a lot from reading it. I have developed special bonds with Chinese Journal of Mechanical Engineering. Chinese Journal of Mechanical Engineering has witnessed the development process of mechanization, automatization, digital-control, informatization, electromechanical integration and optical-electromechanical integration of equipments. And there are a lot of leading writings on Chinese Journal of Mechanical Engineering that inspire China’s mechanical engineering circle to be trail-blazing.

—— Wang Buxuan
Academician of Chinese Academy of Sciences, Professor of Qinghua University

　　Sponsored by Chinese Mechanical Engineering Society, Chinese Journal of Mechanical Engineering (Chinese & English Edition) is an excellent basic and high-tech journal which is a major publication showcasing the level of scholarship of China’s mechanical engineering community, and a major publication for international exchanges for Chinese Mechanical Engineering Society, as well as the important arena for peer researchers to exchange academic achievements and learn from each other. Chinese Journal of Mechanical Engineering has a great influence at home and abroad.

—— Xu Binshi
Academician of Chinese Academy of Engineering, Deputy Director of Chinese Mechanical Engineering Society, Professor of Academy of Armored Force Engineering

　　Chinese Journal of Mechanical Engineering is a major publication showcasing the level of scholarship of China’s mechanical engineering community, and is an important window for academic exchanges between Chinese Mechanical Engineering Society and foreign scholars. It has made significant contributions in promoting sci-tech exchanges and academic development, and has evoked very good international sensation.

—— Pan Xinhan
Former Deputy Secretary of Chinese Mechanical Engineering Society

　　The precision of contributions selected has guaranteed that the publication always holds top academic level and it is leading among relevant international journals of mechanical engineering.

—— Yu Xinlu
Professor of Tsinghua University

　　As China’s top-level and most authoritative academic Chinese Journal of Mechanical Engineering, Chinese Journal of Mechanical Engineering has generally mirrored the level of China’s machinery industry and mechanical technology in over 40 years of development, which has been acknowledged at home and abroad.

—— Lu Yansun
Former Deputy Secretary of the Ministry of Machine-building Industry, Director of Chinese Mechanical Engineering Society

　　Chinese Journal of Mechanical Engineering, Timely report and top quality!

—— Ali Seireg
Professor of University of Wisconsin

　　Chinese Journal of Mechanical Engineering is very popular and prestigious.

—— Kunihiro IIDA
Expert of University of Tokyo