Abstract:
The
characteristics of novel cone-generated cylindrical worm and the
machining principle of using a grinding wheel with two
degree-of-freedom motions are described. A systematic study is
made on the first enveloping process of the grinding wheel
forming a worm and the second enveloping process of the worm
forming a worm wheel with the meshing theory of kinematic
method. Some numerical calculation formulas and important
conclusions are obtained.
Key words:
Machining with two
degree-of-freedom Cylindrical worm drive Meshing theory
* This project is supported by National Natural Science Foundation of
China. Manuscript received on June 10, 1995; revised manuscript
March 19, 1996
|