Home|News|Literature|Journal|Instruction|Forum|Member|Introduction

Chinese  Old version

By    In    Search 

  HomeContents of Chinese Journal of Mechanical Engineering (English Edition),2004 No.2ELECTRO-HYDRAULIC SERVO SYSTEM IN THE CENTRIFUGE FIELD

Dong Longlei

 

Yan Guirong

State Key Laboratory of Mechanical Structual Strength & Vibration,

Xi’an Jiaotong University,

Xi’an 710049, China

 

Li Ronglin

China Engineering Physics Institute,

Mianyang 621000, China

 

 

ELECTRO-HYDRAULIC SERVO SYSTEM IN THE CENTRIFUGE FIELD*

 

Abstract: The mechanical characteristics of the electro-hydraulic servo system in the centrifuge field are analyzed. The hydraulic pressure law in the centrifuge field indicates the existence of the centrifuge hydraulic pressure. The mechanical characteristics of the slide-valve and the dual nozzle flapper valve are studied, and it is found that the centrifuge field can not only increase the driving force or moment of the function units, but also decrease the stability of the components. Finally by applying Gauss minimum constraint principle, the dynamic model of the electro-hydraulic vibrator in the centrifuge field is established, and the mechanical restriction of the system is also presented. The study will be helpful for the realization of the combined vibration and centrifuge test system.

Key words: Electro-hydraulic servo system  Centrifuge field  Mechanical characteristics

 


* This project is supported by National Natural Science Foundation of China (No.19672047) and NSAF Foundation of China(No.10276032). Received October 8, 2003; received in revised form January 12, 2004; accepted January 16, 2004

 

Open or Download Full Text of this Paper (PDF File)

About us-Contact us-Site map-Advertisement service-Cooperation-Legal statement

Address: 22 Baiwanzhuang Dajie, Beijing 100037 China    Tel: 8610-88379907    Fax: 8610-68994557

E-mail: cjme@mail.machineinfo.gov.cn  http: //www.cjmenet.com
©2006 Editorial Office of CJME. All Right Reserved