Home|News|Literature|Journal|Instruction|Forum|Member|Introduction

Chinese  Old version

By    In    Search 

  HomeContents of Chinese Journal of Mechanical Engineering (English Edition),2005 No.3SYNTHESIS OF ROBOTIC MECHANISM FOR MICROSURGICAL CORNEAL GRAFTING

Hu Yida

Robotic Institute,

Beihang University,

Beijing 100083, China

 

Zhao Zhiwen

Singapore- MIT Alliance School

of Mechanical and Aerospace
   Engineering,

Nanyang Technological University,

639798, Singapore

 

Li Dazhai

 

Zong Guanghua

Robotic Institute,

Beihang University,

Beijing 100083, China

 

 

SYNTHESIS OF ROBOTIC MECHANISM

FOR MICROSURGICAL CORNEAL
GRAFTING*

 

Abstract: In order to enhance the effect of corneal grafting, an assisting microsurgical robot has been developed. As one of principal issues for the robotic system design, type and size synthesis of the robotic mechanism is discussed. For this purpose, timeline subtask is analyzed with surgical component motion in manual corneal grafting microsurgery, as the reference of robotic mechanism synthesis. On the basis of study on the kinematic correlation between the arm structures and the wrist structures, configuration of joint is determined for the surgical task and motion in type synthesis of the mechanism. The objective for size synthesis of robotic mechanism is optimization of the mechanism dexterity as a manipulation capability. The condition number based on Jacob matrix is chosen as dexterity measure of the mechanism. The prototype is developed.

Key words: Mechanism synthesis  Robot  Microsurgery  Corneal grafting

 


* This project is supported by National Hi-tech Research and Development Program of China (863 Program, No.2002AA420110). Received August 30, 2004; received in revised form April 4, 2005; accepted May 27, 2005

 

Open or Download Full Text of this Paper (PDF File)

About us-Contact us-Site map-Advertisement service-Cooperation-Legal statement

Address: 22 Baiwanzhuang Dajie, Beijing 100037 China    Tel: 8610-88379907    Fax: 8610-68994557

E-mail: cjme@mail.machineinfo.gov.cn  http: //www.cjmenet.com
©2006 Editorial Office of CJME. All Right Reserved