Home|News|Literature|Journal|Instruction|Forum|Member|Introduction

Chinese  Old version

By    In    Search 

  HomeContents of Chinese Journal of Mechanical Engineering (English Edition),2005 No.3OPTICAL OPTIMIZATION FOR LIQUID CRYSTAL TEST BY LASER-CCD SYSTEM

Chang Ying

 

Zhu Henian

 

Zhang Ziliang

Department of Physics,

Tsinghua University,

Beijing 100084, China

 

Yang Changxi

Department of Precision Instruments

and Mechanology,

Tsinghua University,

Beijing 100084, China

 

 

OPTICAL OPTIMIZATION FOR LIQUID
CRYSTAL TEST BY LASER-CCD SYSTEM*

 

Abstract: For the narrowband of liner charge-coupled device (CCD) receiver and the imaging rule that cylindrical lens system can compress round facula into narrow and long one, the system is simplified and light force can concentrate on a strip facula. Considered the effective CCD length and selection of lens parameters, the system can be optimized. Correspondingly to the CCD pixels, the ray is composed of much angle information. By widening the parallel ray or increasing the lens aperture, luminous flux can be ensured when oblique incidence. Meanwhile, the effective working range can also be improved. Based on the experimental data, cylindrical system could be applied in accurate angle measurement. It has been proved feasible that the cylindrical system can be used in anchor behavior study for liquid crystal (LC) case. The low-power He-Ne laser cylindrical system can carry out the previous effect in high power laser spherical system.

Key words: Linear  CCD  Cylindrical lens  Spherical lens  Liquid crystal (LC)

 


* This project is supported by Natural Science and Research Foundation of Tsinghua University, China (No.JC2002039). Received October 20, 2004; received in revised form February 23, 2005; accepted May 16, 2005

 

Open or Download Full Text of this Paper (PDF File)

About us-Contact us-Site map-Advertisement service-Cooperation-Legal statement

Address: 22 Baiwanzhuang Dajie, Beijing 100037 China    Tel: 8610-88379907    Fax: 8610-68994557

E-mail: cjme@mail.machineinfo.gov.cn  http: //www.cjmenet.com
©2006 Editorial Office of CJME. All Right Reserved