Home|News|Literature|Journal|Instruction|Forum|Member|Introduction

Chinese  Old version

By    In    Search 

  HomeContents of Chinese Journal of Mechanical Engineering (English Edition),2006 No.1FUZZY ECCENTRICITY AND GROSS ERROR IDENTIFICATION

YE Bing

School of Science,

Hefei University of Technology,

Hefei 230009, China

 

FEI Yetai

School of Instrumentation,

Hefei University of Technology,

Hefei 230009, China

 

LIAO Benqiang

School of Science,

Hefei University of Technology,

Hefei 230009, China

 

 

FUZZY ECCENTRICITY AND GROSS
ERROR IDENTIFICATION*

 

Abstract: The dominant and recessive effect made by exceptional interferer is analyzed in measurement system based on responsive character, and the gross error model of fuzzy clustering based on fuzzy relation and fuzzy equipollence relation is built. The concept and calculate formula of fuzzy eccentricity are defined to deduce the evaluation rule and function of gross error, on the base of them, a fuzzy clustering method of separating and discriminating the gross error is found. Utilized in the dynamic circular division measurement system, the method can identify and eliminate gross error in measured data, and reduce measured data dispersity. Experimental results indicate that the use of the method and model enables repetitive precision of the system to improve 80% higher than the foregoing system, to reach 3.5 s, and angle measurement error is less than 7 s.

Key words: Fuzzy clustering  Gross error model  Fuzzy eccentricity  Repetitive precision improvement

 


* This project is supported by National Natural Science Foundation of China (No.59575081, No.59735120). Received January 20, 2005; received in revised form May 10, 2005; accepted October 10, 2005

 

Open or Download Full Text of this Paper (PDF File)

About us-Contact us-Site map-Advertisement service-Cooperation-Legal statement

Address: 22 Baiwanzhuang Dajie, Beijing 100037 China    Tel: 8610-88379907    Fax: 8610-68994557

E-mail: cjme@mail.machineinfo.gov.cn  http: //www.cjmenet.com
©2006 Editorial Office of CJME. All Right Reserved