|
MENG Fanzhong
Chain Transmission
Institute,
Jilin University,
Changchun 130025, China
LI Chun
CHENG Yabing
College of
Mechanical Science
and Engineering,
Jilin University,
Changchun 130025, China |
|
|
PROPER CONDITIONS OF MESHING FOR Hy-Vo
SILENT CHAIN AND SPROCKET*
Abstract:
Proper meshing of Hy-Vo silent chain and sprocket is important for realizing the transmission of the silent chain with more efficiency and less noise. Based on the study of the meshing theory of the Hy-Vo silent chain with the sprocket and the roll cutting machining principle of the sprocket with the hob, the proper conditions of the meshing for the Hy-Vo silent chain and the sprocket are put forward with the variable pitch characteristic of the Hy-Vo silent chain taken into consideration, and the proper meshing design method on the condition that the value of the link tooth pressure angle is unequal to the value of the sprocket tooth pressure angle is studied. Experiments show that this new design method is feasible. In addition, the design of the pitch, the sprocket tooth pressure angle and the fillet radius of the sprocket addendum circle are studied. It is crucial for guiding the design of the hob which cuts the Hy-Vo silent chain sprocket.
Key words:
Hy-Vo silent chain Variable pitch Proper meshing conditions
Sprocket tooth pressure angle Sprocket hob Modification coefficient
|