Liu Jihong, et al
Deficient information modeling of mechanical products
for conceptual shape design ………………………………………………………………………………………… (1)
Zhang Shuyou, et al
Research of movement navigation based on assembly constraint recognition
……………………………………… (6)
Liu Xuan, et al
Research for clustering of feature manufacturing-oriented ………………………………………………………… (11)
Li Li, et al
Research on negotiation-based partner selection approach
………………………………………………………… (15)
Guo Dongming, et al
Novel method solving numerical instabilities in topology optimization
…………………………………………… (22)
Dong Yuping, et al
Estimation of local hysteretic properties for shape memory alloys…………………………………………………(27)
Wang Yu, et al
Gate type selection based on fuzzy mapping
……………………………………………………………………… (31)
Xiong Hanwei, et al
New visual method for free-form surface reconstruction……………………………………………………………(35)
Ren Jialong
Study on sub-dry cutting GCr12…………………………………………………………………………………… (40)
Sun Dongye, et al
Study on control strategy of clutch starting for car with a metal pushing
belt-planetary gear continuously variable transmission system
…………………………………………………… (43)
Zhang Xiaoming, et al
Analysis of slab edgingby a 3-D rigid visco-plastic finite element method………………………………………… (48)
Gao Xiangdong, et al
Artificial neural network and fuzzy logic controller
for GTAW modeling and control…………………………………………………………………………………… (53)
Sun Fengchun, et al
Design and experiment of electric bus
……………………………………………………………………………… (57)
Lin Chao, et al
Methods of modern design for cylindrical gear drive based on the Internet…………………………………………(62)
Hao Zhiyong, et al
Optimum control to a partially controlled
turbogenerator
shaft torsional vibration system
…………………………………………………………………………………… (66)
Luo Yixin
Reliability and optimization design of new roller orientation clutch
……………………………………………… (69)
Wang Ziqin, et al
Stress-strain finite element analysis and fatigue life prediction
for bolted connections …………………………… (75)
Yang He, et al
Effect of unequal deformation in development
of
advanced plastic processing technologies……………………………………………………………………………(79)
Li Dayong, et al
Techiniques about direct optimizing control of green sand quality………………………………………………… (83)
Zhang Qingying
Computer vision applied in the precision control system
………………………………………………………… (87)
Song Haisheng, et al
Architecture of manufacturing execution system
in the extended enterprise
……………………………………… (90)
Jiang Zuhua, et al
Virtual fuel-pump design…………………………………………………………………………………………… (94) |
|