ZHOU Bo, HAN Jianda

Nonlinear estimation methods for autonomous tracked vehicle with slip………………………………………………(1)
GAN Fangjian, LIU Zhengshi, REN Chuansheng, et al

Robot's motion error and on-line compensation based on force sensor  ……………………………………………… (8)
LIANG Chenghao, HUANG Naibao, GUO Jianwei, et al

Inhibition mechanism of Na₂MoO₄ for carbon steel in 55% LiBr Solution ………………………………………… (15)
ZHAN Mei, ZHOU Qiang, YANG He, et al

Establishment of 3D FEM model of multi-pass spinning…………………………………………………………… (19)
CHEN Ming, MA Yuping, XIANG Daohui, et al

Fabrication of diamond tubes in bias-enhanced hot-filament
chemical vapor deposition system…………………………………………………………………………………… (24)
WANG Chengyong, ZHOU Li, FU Hao, et al

High speed milling of graphite electrode with endmill of small diameter …………………………………………… (27)
XU Lianghong, TIAN Zhiling, ZHANG Xiaomu, et al

Metal inert gas welding of 2519-T87 high strength aluminum alloy………………………………………………… (32)
CHANG Yunlong, SU Hang, LIN Bin, et al

Spot welding quality fuzzy control system based on multisensor information fusion……………………………… (36)
XUE Songbai, WU Yuxiu, HAN Zongjie, et al

Effects of lead widths and pitches on reliability of quad flat package (QFP) soldered joints…………………………(40)
LI Junyue, XUE Haitao, LI Huan, et al

Basic theory and applications of welding arc spectral information……………………………………………………(44)
LI Hui, LI Runfang, XU Hongbin, et al

Experimental study on superficial coat of gears of nitrided 32Cr2MoV
coated with TiN film by multi-arc ion plating…………………………………………………………………………(52)
MENG Fanzhong, LI Chun, CHENG Yabing

Proper conditions of meshing for Hy-Vo silent chain and sprocket ………………………………………………… (57)
SYED Noman Danish, MA Chaochen, YANG Ce, et al

Comparison of two methods to increase tip clearance and its effect on
performance of turbocharger centrifugal compressor stage……………………………………………………………(60)
CHEN Juan, HONG Jun, ZHANG E, et al

Body pressure distribution of automobile driving human machine contact interface…………………………………(66)
GAO Feng, ZHOU Yu, DU Farong, et al

Algorithm of pretreatment on automobile body point cloud………………………………………………………… (71)
LEI Liping, ZHAO Yinghong, ZENG Pan

Influence of roll diameters on deformation behaviour of
high temperature superconducting tape ……………………………………………………………………………… (75)
ZHAO Yongxiang, PENG Jiachun, YANG Bing

Research progress on structural fatigue reliability design and analysis
methods of Chinese railway vehicles………………………………………………………………………………… (79)
HU Hong, SHI Hongyan, BEN MRAD Ridha

Active vibration suppression via linearizing hysteresis of piezoceramic actuators ………………………………… (84)
LI Ning, SHI Tielin

Estimation of the number of correlated sources with common
frequencies based on power spectral density………………………………………………………………………… (88)
ZHANG Xinong, XIE Shilin, ZHANG Yahong

Multi-layer piezoelectric actuator and its application in
controllable constrained damping treatment  ………………………………………………………………………… (94)
GUAN Guangfeng, CONG Dacheng, HAN Junwei, et al

Application of FRF estimator based on errors-in-variables model
in multi-input multi-output vibration control system……………………………………………………………… (101)
CHEN Chunbao, WANG Liya

Modified genetic algorithm applied to solve product family optimization problem ……………………………… (106)
ZHU Weidong, KE Yinglin

Reconstruction of symmetric B-spline curves and surfaces………………………………………………………… (112)
CHEN Kejia, JI Ping

Dynamic advanced planning and scheduling with frozen interval for new orderss………………………………… (117)

Contents and Abstracts of Chinese Journal of Mechanical Engineering (Chinese Edition),

Vol. 43, No.7-8, 2007 ……………………………………………………………………………………………… (120)