Home|News|Literature|Journal|Instruction|Forum|Member|Introduction

☆Chinese  ☆Old version

By    In    Search 

　 Home→Contents of Chinese Journal of Mechanical Engineering (English Edition)→1988 Vol.1

1988 Vol.1
He Lin, et al
Wear-corrosion resistant as-cast 28Cr white cast iron………………………………………………………… (1-001)
Wang Buxuan, et al
Experimental study of condensation heat transfer for cooling
gas flow contanining water vapor……………………………………………………………………………… (1-013)
Cao Cunchang
A new calculation method of the three-dimensional contact points on
tooth surface of crossed helical gears…………………………………………………………………………… (1-023)
Wang Xianshang
The identification of the state space model for the machine tools by
the frequency response test……………………………………………………………………………………  (1-030)
Hu Yizheng, et al
The investigation and application of sulphonitro-carburization…………………………………………………(1-043)
Xu Zhou, et al
The dynamic and static recrystallization diagram of hot deformed austenite……………………………………(1-054)
Wang zhiqiang, et al
Dynamic identification of vibration system in the time domain…………………………………………………(1-066)
Luo Jiashun
On straight line tooth worm drive with arc surface of parabolic modification form…………………………… (1-075)
Xie Liyang, et al
Experimental study on the cumulative fatigue damage under two stress leveis………………………………… (1-090)
Yue Duiqian
General formulas of tool cutting angles ………………………………………………………………………… (1-100)
Cao Yang, et al
Numerical analysis of the stress strain cycles caused by GTA welding of thin
plate — A study of the specific features of transient welding thermal
elasto-plastic stress-strain formation in titanium alloys…………………………………………………………(1-109)
Xu Shangxian, et al
Analysis, calculation and optimum design of the recssed hydrostatic
bearing without axial grooves…………………………………………………………………………………… (1-119)
Chen Jingyi, et al
Viscous flow field calculation of radial impellers ……………………………………………………………… (2-133)
Wang Min, et al
Studies on temperature field of the tool in milling of difficult-to-cut materials………………………………… (2-145)
Zheng Huanwen, et al
Experimental investigation on the mechanism of high speed heavy load grinding………………………………(2-154)
Jiang Li, et al
Thermohydrodynamic analysis of the elliptical bearing's characteristics……………………………………… (2-166)
Hou Wenmei, et al
The application of the heterodyne phase comparing interference in nano-meter measurement…………………(2-174)
Liu Xinsheng, et al
The shakedown analysis of the thick-walled cylindrical tube for elastic-power hardening …………………… (2-180)
Zhang Zhuming
Investigation of the application of line EHL status diagram…………………………………………………… (2-191)
Zhang Qixian, et al
Kinematic analysis of planer multi-link complex mechanisms via method
of disconnecting certain links and parts………………………………………………………………………… (2-201)
Ren Bosen
Profiling method of centrifugal compressor having elliptic vane shapes…………………………………………(2-209)
Ma Weidian, et al
Application of the J-integral to elasto-plastic fracture study of
non-homogeneous welded joints…………………………………………………………………………………(2-217)
Zhou Jingen
Fatigue crack initiation and propagation from notches………………………………………………………… (2-226)
Zhou Huijiu
Several theoretical questions on design and use of pinion type cutters
for straight-sided internal spline…………………………………………………………………………………(2-233)
Li Xiuxiang
Study on vibration testing systems for rolling bearing………………………………………………………… (2-245)

　
　 About us-Contact us-Site map-Advertisement service-Cooperation-Legal statement 　

Address: 22 Baiwanzhuang Dajie, Beijing 100037 China    Tel: 8610-88379907    Fax: 8610-68994557

E-mail: cjme@mail.machineinfo.gov.cn　　http: //www.cjmenet.com
©2006 Editorial Office of CJME. All Right Reserved