Velocity analysis of a spatial mechanism using the principle of virtual forces ………………………………… (1-001)
David Redekop, et al

Velocity analysis of a planar mechanism using a method from sitatics ………………………………………… (1-007)
Du Fengshan, et al

Numerical simulation on aluminium sheet rolling ……………………………………………………………… (1-011)
Qu Jifang, et al

Research on zero clearance cycloid ball transmission…………………………………………………………… (1-017)
Du Junwen, et al

Automatic programming system with NURBS method on PC ………………………………………………… (1-024)
Zhang Feihu, et al

Research on the adaptive control of drilling process …………………………………………………………… (1-029)
Li Shangyi, et al

Method to eliminate the influence of servo-motor friction torque on ultral-low
speed performance of electrohydraulic servo system…………………………………………………………… (1-035)
Yan Xiangan, et al

Frequency domain analysis and computer simulation of pressure
pulsation resonance in high pressure piping network…………………………………………………………… (1-040)
Wu Hongtao, et al

Kinematics and error analysis for multibody system…………………………………………………………… (1-049)
Huang Wenzhen, et al

Theoretical analysis and experimental investigation of the influence of
bearing misalignment on stability of rotor-bearing systems …………………………………………………… (1-053)
Guo Taiyong, et al

Penalty function method of continuum shape optimization …………………………………………………… (1-058)
Li Runfang, et al

Finite element solution to coupled thermo-elastic contact
stress and impact response of meshing gears …………………………………………………………………… (1-063)
Liang Xicheng, et al

Approach to dispatching FMS tool system …………………………………………………………………… (1-068)
Zhang Qixin, et al

Study on ultrasonic vibration drilling in carbon fiber reinforced polymers………………………………………(1-072)
Li Yuanxun, et al

Force analysis and dynamic simulation of the plain flow
distribution pair in a radial piston hydraulic motor………………………………………………………………(1-078)
Zhao Han, et al

Fuzzy design system of cam mechanisms ……………………………………………………………………… (2-085)
Liu Hongmin, et al

Study of the 3-dimensional stress of cold strip rolling under centre wave……………………………………… (2-091)
Nie Shaomin, et al

Discrete optimization approach for 3-D space plate-system structure………………………………………… (2-097)
Bu Yan, et al

Wear transitions of C/Cu composite materials ………………………………………………………………… (2-103)
Zhao Yongsheng, et al

Optimal dynamic load distribution of multiple cooperating robot manipulators ……………………………… (2-108)
Wang Yuxin, et al

Experimental study of nonlinear vibration characteristics of an elastic linkage ………………………………… (2-112)
Ye Maodong, et al

New criterion of degree of freedom for plane mechanism ……………………………………………………… (2-118)
Zhang Shemin, et al

New mechanism of limited-slip differential………………………………………………………………………(2-124)
Gong Kaijun, et al

Shape optimization design of crush tooth using  finite element method…………………………………………(2-130)
Jin Changshan, et al

Analog simulation of dynamic response in dry friction pair by thermodynamics……………………………… (2-135)
Yu Shenjun, et al

Study on structure and properties of 18SiMnCu dual phase steel……………………………………………… (2-143)
Xu Hanping, et al

Some new techniques in high pressure engineering……………………………………………………………… (2-148)
Zhang Dajun, et al

Flexible multibody system dynamics-finite segment method…………………………………………………… (2-156)
Hu Weigang, et al

Gear box concept design expert system of NC miller based on object-oriented technology …………………… (3-163)
Du Fengshan, et al

Flow field analysis and graphic CAD during 3-roll reducing of the hollow tube…………………………………(3-170)
Zhang Guorui, et al

Intelligent CAD of crane travelling mechanisms………………………………………………………………… (3-176)
Le Xiaobin, et al

New fatigue cumulative damage probabilistic model of the mechanical parts……………………………………(3-183)
Liang Xichang, et al

Research of new technologies in gear-machining………………………………………………………………… (3-188)
Luo Lifeng, et al

Calculation of W-N gear drives running-in procedure…………………………………………………………… (3-193)
Li Benli, et al

Analysis solution of bulging convexity of the hydraulic elastic bulging roll …………………………………… (3-198)
Zhou Jianru, et al

Modelling of two-flexible-arm mechanism with elastic joints……………………………………………………(3-205)
Ma Dengzhe, et al

Research and practice for manufacturing environment
modelling technology of CIMS ………………………………………………………………………………… (3-211)
Ma Xiangyang, et al

CAGD and NC milling of the casting mould of helical intake port………………………………………………(3-219)
Wang Liansheng, et al

UBN study on double-die ironing process……………………………………………………………………… (3-225)
Xu Peijun, et al

Study on the increase of slope-walking ability of multi-legged robot…………………………………………… (3-232)
Yan Junqi, et al

Approach to integrated process planning system architecture ………………………………………………… (3-237)
Qin Datong, et al

Study on controllable mismacthed engagement
of cone-generated cylindric worm gearing ……………………………………………………………………… (4-243)
Ruan Feng, et al

Influence of superplasticity of Cu-based shape memory alloy on its memory effect……………………………(4-251)
Zhang Dajun, et al

Computer aided analysis of flexible member in consideration
of the effects of dynamic stiffening………………………………………………………………………………(4-257)
Xie Lin, et al

Research on CAD/CAM for hydraulic manifold blocks………………………………………………………… (4-268)
Ma Peisun, et al

Research of kinematic characteristics for quadruped walling
vehicle with legs of different dispositions of DOFs …………………………………………………………… (4-275)
Yu Yangui, et al

Calculations to its fatigue damage fracture and total life under
many-stage loading for a crank shaft …………………………………………………………………………… (4-281)
Shi Zhongxiu, et al

Reliability-based synthesis of path generating linkages ………………………………………………………… (4-289)
Zhao Ji, et al

Study on automatic polishing of mould curved surface at constant pressure intensity………………………… (4-296)
Yang Wentong, et al

Scuffing model considering influence of hydrodynamic lubrication………………………………………………(4-303)
Xu Hao, et al

Fatigue reliability calculation model for component under random loading………………………………………(4-307)
Wang Qiyi, et al

Dynamic modelling for rolling slideways assembly with damping oil-films …………………………………… (4-311)
Chen Liangyu, et al

Method for precise calculation of root stress of spiral bevel gears………………………………………………(4-316)
Ping An, et al

Treatment of complex load history and construction of fatigue load spectrum………………………………… (4-320)
Zhang Guozhong, et al

Theoretical study mode of pneumatic rook drills ……………………………………………………………… (4-324)