Cutting power modelling in milling……………………………………………………………………………… (1-001)
Ju Naijun

Vehicle dynamic analysis simulation-modelling theory and engineering application …………………………… (1-006)
Guan Xingfan, et al

Hydraulic calculation and measurement of flow field within
inlet passage of large pumping station……………………………………………………………………………(1-015)
Hao Chunshui, et al

Study on formation mechanism of adhering layer formed on tool face ………………………………………… (1-022)
Wang Ze, et al

Calculation and experimental investigation of electric field induced by
electrodes in electrostatic charged powder spraying technique ………………………………………………… (1-026)
Zou Huijun, et al

Forming dynamic equations of elastic linkage and investigation of model error………………………………… (1-030)
Zhang Hui, et al

Study on the on-line optimal control of parameters of three-cone blast hole drills………………………………(1-038)
Zuo Dunwen, et al

Efficiency in lapping ferrite………………………………………………………………………………………(1-042)
Wang Wanshan, et al

Study on copying quality in contour grinding……………………………………………………………………(1-047)
Yu Siyuan, et al

Research of machining surface quality of engineering ceramics ………………………………………………… (1-051)
Cui Yunqi, et al

Theory of helicoid of spherical hob………………………………………………………………………………(1-057)
Zhao Dingxuan, et al

Modals related to stability and comfortability of articulated vehicle…………………………………………… (1-066)
Li Jinbao, et al

Study on double circular arc profile spiral bevel gear transmission………………………………………………(1-071)
Yuan Shouqi, et al

Performance characteristics and viscous flow analysis of centrifugal pumps……………………………………(1-075)
Li Runfang, et al

Tooth contact finite element analysis of spiral bevel and hypoid gears………………………………………… (1-082)
Su Suchen, et al

Creation of optimal movement strategy of plural moving objects by GA……………………………………… (2-087)
Zhao Dongbiao, et al

Fuzzy model-following adaptive control design for robot manipulators ……………………………………… (2-097)
Huang Changhua, et al

Lubrication and loaded tooth contact analysis for spiral bevel and hypoid gears ……………………………… (2-104)
Yang Minguan

Design on stop seal for process thick liquid pump………………………………………………………………(2-111)
Qian Wenhan

Fast generation of optimal assembly plans……………………………………………………………………… (2-117)
Yuan Suoxian, et al

Mathematical model of repeatability for robots………………………………………………………………… (2-125)
Zhao Wankang, et al

Mechanochemical polishing of engineering ceramics …………………………………………………………… (2-130)
Yi Chuijie, et al

Mechanical vibrational power flow in beam-plate assemblies……………………………………………………(2-135)
Sun Jinghui, et al

Calculations of the inner disturbance frequencies inside the epicyclic gearing …………………………………  (2-142)
Tong Zhou, et al

Kineto-elastodynamic analysis used by the matrix-transit method………………………………………………(2-149)
Yang Fulun, et al

Regularity of vibration response of mechanical system under
affect of vari-frequency exciting force…………………………………………………………………………… (2-155)
Chen Cichang, et al

Internal flow in cross-flow fan for air conditioner ……………………………………………………………… (2-160)
Xu Liju, et al

Analytical model algorithm for dynamics of robotic manipulators………………………………………………(2-168)
Zhang Jiancheng, et al

Application of magnetization viscous character of magnetic
fluid in electro-hydraulic servo amplifier…………………………………………………………………………(2-172)
Harry Gingold, et al

A modified heat conduction model……………………………………………………………………………… (3-175)
Yang Guoling, et al

Deliberation to the definition of tooth thickness for involute helical
gear in international standard ISO 1122/1 ……………………………………………………………………… (3-187)
Zhou Qu, et al

Coated carbide tool's cutting performance and its data base …………………………………………………… (3-203)
Wang Yiqun, et al

Study on using serial pipe to improve the dynamic response of
electro-hydraulic speed control system ………………………………………………………………………… (3-209)
Zheng lianzhu, et al

Soft terrain spectrum causing vehicle vibration ………………………………………………………………… (3-215)
Liu Fei, et al

Temperature field control principle and control models for cryogenic machining system……………………… (3-222)
Chen Cichang

Unsteady flow analysis of mirror-flow fan with a casing ……………………………………………………… (3-228)
Wang Zhongqi, et al

Machining mechanism in a cross-like surface of advanced ceramics …………………………………………… (3-238)
Xie Liyang, et al

Fatigue reliability design and estimation method for variable loading…………………………………………… (3-244)
Yi Chuijie, et al

Prediction of sound responses in box-like structures…………………………………………………………… (3-248)
Hu Gang, et al

Numerical analysis of elastohydrodynamic lubrication with transient viscosity ……………………………… (4-255)
He Ning, et al

Notch wear of mechining nickel based alloys with ceramic tools ……………………………………………… (4-262)
Shi Jingyu, et al

Study on the new process of cold  box－cold box plus process…………………………………………………(4-267)
Wei Guangxin, et al

Prediction of pump characteristics according to geometrical
parameters of impeller and volute casing…………………………………………………………………………(4-272)
He Qingfu, et al

Study on testing technique for measurement of fatigue-creep interaction resistance…………………………… (4-278)
Hu Weigang, et al

Module definition model for modular design and manufacturing of heavy duty machine tools………………… (4-281)
Gong Yunpeng, et al

Analysis of tooth form error of equal base circle bevel gear …………………………………………………… (4-287)
Liu Zhengxun, et al

Ruled surface machining by 4-axes simultaneous control wire-EDM……………………………………………(4-291)
Huang Yihong, et al

Finite element analysis and experimental study of the metal multidie ironing process ………………………… (4-298)
Wang Qiyi, et al

Shared control method for combination state conversion of electro-mechanical equipment …………………… (4-304)
Yang Helai, et al

Development and vibration analysis of ceramic rocker arm …………………………………………………… (4-309)
Zhang Tiecheng, et al

The oretical tooth profile and its substitute curve of the pinion cutter for pinholes…………………………… (4-313)
Meng Jinxian, et al

Applying regression and stochastic time series analysis to the
prediction of pitting fatigue life for gears…………………………………………………………………………(4-319)
Zhang Hanqian, et al

New-view of characteristic zone classification of fusion welding joint ………………………………………… (4-325)
Chen Fang, et al

Dynamic mathematical model of chemical composition for melted iron
in cupola and microcomputer simulation…………………………………………………………………………(4-332)
Zhang Jiwei, et al

Recognition of structural diagram of machine tool speed
change system with any composite ratio…………………………………………………………………………(4-339)