No reverse error ball transmission and force analysis on heterotype single cycloid …………………………… (1-001)
Zhang Zhenchun, et al

Experimental study on open-die cold extrusion forming
technique for involute spline shafts………………………………………………………………………………(1-006)
Xiong Yeping, et al

Optimum control of vibration and structure-borne noise for
machinery on flexibe foundation………………………………………………………………………………… (1-013)
Du Zeyu, et al

Metal surface modification-research of brush plating technology of Cr layor ………………………………… (1-021)
Zhang Xinfang, et al

Construction of integrated CAD tools environment to
support concurrent collaboration design………………………………………………………………………… (1-025)
Hua Jiang, et al

Simulation of roll-forming processes of welded pipe…………………………………………………………… (1-032)
Han Jianyou, et al

Shaking moment balancing of spatial linkages by adding planar cams……………………………………………(1-038)
Ren Chenzu, et al

Eccentric circular groove lapping technique for ceramic balls…………………………………………………… (1-045)
Wang Yuxin, et al

Study on lower order harmonic resonance of elastic linkages-superharmonic resonances ……………………… (1-049)
He Huinong, et al

Experimental study on lubrication behavior of double enveloping hourglass worm gearing …………………… (1-057)
Ruan Feng, et al

3D rigid-plastic finite element analysis of backward spinning of cylindrical workpiece…………………………(1-063)
Jia Mingjiu, et al

Distribution of reachable workspace areas in physical model of the
solution space of 2-DOF parallel planar manipulators ………………………………………………………… (1-071)
Gong Daoxiang, et al

Analysis and prediction of interference in assembling curved bevel gears ……………………………………… (1-079)
Chen Shuchang, et al

Improvements on the configuration and optimum parameters
of high-speed thrust bearings …………………………………………………………………………………… (1-084)
Xie Youbai

On the systems engineering of tribo-systems…………………………………………………………………… (2-089)
Huang Xiangdong

New theoretical model of automotive aerodynamics …………………………………………………………… (2-100)
He Qingfu, et al

Creep-fatigue resistance of a Fe-Ni-Cr alloy in a range of high alternating stress ……………………………… (2-110)
Yi Chuijie, et al

Statistical energy analysis model on L-shaped thick plate structures……………………………………………(2-114)
Li Zhilin, et al

Valence electron structure of austenite-martensite interface
and phase transformation toughening…………………………………………………………………………… (2-119)
Mao Qiande, et al

Study on gas-lubricated tilting flat-sector-pad thrust bearing…………………………………………………… (2-127)
Hu Haiyan

Design of elastic constraints from viewpoint of nonlinear dynamics…………………………………………… (2-135)
Tang Liwei, et al

Active control of vibrational response in a flexible linkage……………………………………………………… (2-143)
Xu Hongchang, et al

Fuzzy mathematics method in diagnostic reasoning …………………………………………………………… (2-154)
Zuo Wuxi, et al

Calculation of limit glossiness of natural granite and theoretical
analysis of soft polishing effect ………………………………………………………………………………… (2-159)
Liu Yongxian, et al

Analysis of 3-D FEM on elastic-plastic contact problem with friction………………………………………… (2-170)
Zhou Entao, et al

Four-wheel steering system controlled by single piece processor ……………………………………………… (2-175)
Wang Hongli, et al

Nonlinear vibration of the rotor system of active magnetic bearings …………………………………………… (2-179)
Chan Tat Leung

Modeling of a solid cone pressure-swirl atomizer ……………………………………………………………… (3-185)
Li Wenhui, et al

Study on isomorphism of planar kinematic chains……………………………………………………………… (3-193)
Shi Jinfa, et al

Acquirement and computer processing of 3-D surface shape data……………………………………………… (3-199)
Jiang Chengyu, et al

Hole profile and tunnelling effect in laser drilling ……………………………………………………………… (3-205)
Sun Jing, et al

Investigation on brittle fracture propagation-arresting characteristics of steel pipe …………………………… (3-211)
Xu Zhengming, et al

Study on the mechanism to improve performance of carbide blade by laser …………………………………… (3-216)
Zhu Shishun, et al

Experimental study on elastic-plastic controlling design for box steel structures ……………………………… (3-221)
Sun Quanyin, et al

Study on walking boat-type tractor………………………………………………………………………………(3-225)
Qi Ershi, et al

Research on combination and planning of processing units under CIMS condition …………………………… (3-234)
Wu Xutang, et al

Tooth profile analysis and basic parameter determination of push-rod reductor ……………………………… (3-242)
Gu Qiankun, et al

Study on automatic balance technology for the rigid rotor……………………………………………………… (3-248)
Li Zhouxin, et al

Study on effects of physico and chemico-properties of melting
slag on detachability of SSFCE ………………………………………………………………………………… (3-254)
Xiong Yeping, et al

Power flow analysis for a new isolation system-flexible floating raft……………………………………………(3-260)
Tang Renhong

Product modeling and process planing within concurrent engineering environment …………………………… (4-265)
Zhang Yuru, et al

Method of classifying grasps by robot hands……………………………………………………………………(4-271)
Li Lixing, et al

Optimum design of high-speed railway locomotive traction gear ……………………………………………… (4-278)
Hu Xuanli, et al

New method for vibration measurement and control of moving wire…………………………………………… (4-286)
Zhang Qing, et al

Method of enhancing the positioning accuracy for NC machine tools ………………………………………… (4-292)
Yu Wenhua, et al

Study on the feedforward compensation of the motion errors of NC machine tools…………………………… (4-300)
Li Huan, et al

Study on the characteristics of under water plasma arc ………………………………………………………… (4-306)
He Zhengjia, et al

Wavelet transform in tandern with autoregressive technique for
monitoring and diagnosis of machinery ………………………………………………………………………… (4-311)
Cheng Fu'an, et al

Cylindrical worm machined by the cone grinding wheel with
two degree-of-freedom and meshing theory of its drive………………………………………………………… (4-318)
Xiong Guoliang, et al

Fault diagnosis expert system for rotating machinery based on
a fuzzy probability logic inference model ……………………………………………………………………… (4-325)
Li Yunhua, et al

Tracking variable structure control law with application to electro-hydraulic servo systems ………………… (4-331)
Zhang Jingmin, et al

Modal analysis of a chassis frame of a heavy lectra haul ……………………………………………………… (4-337)
Sun Dezhi, et al

Friction in gear teeth under extreme pressure lubrication ……………………………………………………… (4-341)