Study on the scanning probe microscope with wide measuring range……………………………………………(1-001)
Zhao Xiaobo, et al

Modeling for flexible manufacturing systems with a Markov job
routing and a new block mechanism………………………………………………………………………………(1-007)
Fang Yuefa, et al

Dynamic model of a three-degree-of-freedom parallel robot …………………………………………………… (1-013)
Chen Xindu, et al

 Genetic algorithms in structural optimization with mixed discrete design variables…………………………… (1-019)
Li Peiyu, et al

Nonlinear hysteric damping model of electrorheological fluid……………………………………………………(1-025)
Wang Hongli, et al

Investigation on stability of the car active suspension system ………………………………………………… (1-032)
Fang Ning, et al

On consumption of cutting power influenced by chip flow
under non-free cutting conditions ……………………………………………………………………………… (1-037)
Zhou Zhaoyao, et al

Study on new technique of two-way hydro-mechanical ironing…………………………………………………(1-044)
Cao Binggang

Investigation on compressibility and bulk modulus of fluid …………………………………………………… (1-049)
Zhang Jianhua, et al

Approach to fault detection and diagnosis of nonlinear electro-hydraulic servo system ……………………… (1-054)
Lin Shuzhongl

Manufacturing of harmonic gears by cold rolling…………………………………………………………………(1-060)
Huang Zaowen, et al

Study on the mathematical model for tube inversion process……………………………………………………(1-066)
Zou Ping, et al

Investigation on fatigue failure by elastic-plastic FEM ………………………………………………………… (1-072)
Suliman S M A, et al

Investigation into the degradation of cutting fluids in a workshop environment…………………………………(2-077)
Zhou Yunfei, et al

Direct interpolation and adaptive machining of compound surfaces …………………………………………… (2-085)
Fu Jianzhong, et al

New analysis method of thermal deformation multivariable control for precision machine …………………… (2-090)
Li Chunyang, et al

Reaction mechanism and dynamics of paste boronizing in a plasma …………………………………………… (2-095)
Yang Jiandong, et al

Discussing on solid abrasive lapping path ……………………………………………………………………… (2-101)
Li Zhongyou, et al

Edge process on arc welding inverter commutating………………………………………………………………(2-106)
Ma Weidong, et al

New approach on cutter path generation for plane milling……………………………………………………… (2-112)
Xu Xipeng, et al

Application of CBN wheel in constraining workpiece burning
during creep feed grinding of titanium alloy………………………………………………………………………(2-119)
Zhou Zhaojing, et al

New autoregressive moving average spectrum estimation and cepstrum algorithm …………………………… (2-125)
Shi Zhongxiu, et al

Reliability-based analysis and synthesis of mechanical error for path generating linkages………………………(2-130)
Wang Baoguang, et al

6D measuring technology and method of coordinate transformations
in the automobile body-in-white measurement ………………………………………………………………… (2-136)
Hu Xuanli, et al

Finite strip dynamic analysis of cylindrical shell sandwich structures ………………………………………… (2-141)
Zhu Di

Tool design of electrochemical machining with passivated electrolyte ………………………………………… (2-148)
Shen Qian, et al

Mathematical model of NC machining nonconventional milling
cutters-forming method of rake faces …………………………………………………………………………… (2-156)
Nabhan M B W

Preventive maintenance managenent …………………………………………………………………………… (3-161)
Zhou Yuejin, et al

Quality system and implementation in CIM environment……………………………………………………… (3-168)
Zhang Yitong, et al

Optimal control principle of profile errors for machining of cylinder CAM…………………………………… (3-176)
Zhou Xiaojun, et al

Research achievements on advanced NDT……………………………………………………………………… (3-182)
Li Decai, et al

Theoretical and experimental study on magnetic fluid sealing of serrated form………………………………… (3-187)
Xu Haibo, et al

Stability analysis of fluid flow in journal bearing ……………………………………………………………… (3-195)
Cai Ruibin, et al

Research on optimum combustion chamber construction
of automotive direct injection diesel engine………………………………………………………………………(3-199)
Chen Cichang

On similitude of cross-flow fan in dynamic performance and noise character ………………………………… (3-203)
Li Jiangxiong, et al

Projection of arbitrary point parametric Bezier surface and its
applicationin complex surface NC measuring analysis ………………………………………………………… (3-209)
Wang Hongxu, et al

Study on optimal intial work roll profile for cold strip mill …………………………………………………… (3-214)
Zhu Qiongchang, et al

Correlation testing method for determining distribution of measurement data ………………………………… (3-220)
Liu Jianjun, et al

New approach for solving restricted torsion problems ………………………………………………………… (3-227)
Ren Naifei, et al

Laser shock processing extends fatigue life of 2024T62………………………………………………………… (3-232)
Wang Taiyong, et al

Research on multi-function intelligent identification and monitoring system…………………………………… (3-236)
Hu Huanan, et al

Numerical analysis and computer simulation of formation of
residual stresses in grinding process …………………………………………………………………………… (4-241)
Liang Xizhi, et al

Experimental investigation of passive control on
unstable characteristics in axial flow fan………………………………………………………………………… (4-248)
Huang Xiangdong, et al

Strategies for solving key problems in research and development of
automotive continuously variable transmission ………………………………………………………………… (4-253)
Lü Guangqing, et al

Improvement on stability of adaptive noise control system
by use of gradient back-adjusting FLMS algorithm………………………………………………………………(4-258)
Shi Rong, et al

Finite element simulation of thickness of exit slab shell in crystallizer ………………………………………… (4-263)
Liu Hongmin, et al

Study on strip and roll deformation coupling of cold strip rolling on 4-h mill ………………………………… (4-268)
Xu Lizhong

Study on loads and contact stresses for toroidal drive ………………………………………………………… (4-275)
Wang Yixing, et al

Kinematics analysis of guided chain drive mechanism with linkages …………………………………………… (4-279)
Wang Zhiping, et al

Microcomputer picture processing system of cast-iron metallographic structure……………………………… (4-284)
Huang Qingxue, et al

Analysis of rolling by elasto-plastic finite deformationcontact boundary element method …………………… (4-289)
Shan Ping, et al

Simulation study on capacitor discharge percussion welding…………………………………………………… (4-295)
Li Mingshan, et al

Study on gap distribution in movable sleeve-tooth drive ……………………………………………………… (4-299)
Yang Minguan, et al

Construction design and flow analysis of centrifugal pump
impeller with super-low specific speed ………………………………………………………………………… (4-305)
Li Shuhe, et al

Improving accuracy of CNC machine tools through compensationfor thermal errors ………………………… (4-310)
Ding Xilun, et al

Study on contact character of rolling cone worm gearing
and its parameter reasonable option …………………………………………………………………………… (4-315)